Bucket hydro help needed

[OrangeMarty]

Hi guys, hope someone can help me. I had one of the four hoses that lifts and tilts the bucket spring a leak, and so I went and got a new hose. And figuring that others might also leak, got all 4 new hoses. Upon installation of all four new hoses, the bucket will not tilt up. The whole bucket will lift and fall, but not tilt. Can anyone help? It has plenty of fluid. Thanks.

Marty

 

[tractor kid]

You probably have two of the hoses hooked up backwards. Two of them work the tilt and two of them work up and down. Trace back the hose that is hooked to the tilt and change those two.

 

[OrangeMarty]

I thought about that. Could air in the lines cause this issue too?

 

[North Idaho Wolfman]

Air in the lines would only make it jumpy till it bleed the air out, couple cycles would do that.

 

[OrangeMarty]

Okay, finally gave in and went down to the local Kubota dealer and had a service dude take me out to one like it, and made a diagram of what hoses went to what nipples. And, I did have a couple wrong, re-hooked them up and works great. Thanks for the help

Marty