I might have the possibility to acquire a BH76 and the associated subframe off a B3200. Would it fit/work on my B2650? If I needed to drill holes or add a spacer here or there, it's not an issue, just wanted to see if those who know more than me could confirm it's at least feasible, and I'm not potentially trying to do something that isn't worth the effort.
BH76 on a B2650
- Thread starter biketopia
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Go here are compare the two subframes.
To me they are very close.
apps.kubotausa.com
Pick BH77 (The BH76 took the same subframe) then look at options for the subframes:
To me they are very close.
Kubota Tractor Corporation - Illustrated Parts List
- K-PAD - Parts Lists - Illustrated Parts Lists - diagrams
Pick BH77 (The BH76 took the same subframe) then look at options for the subframes:
Thanks, @North Idaho Wolfman! I thought I had stumbled upon something similar in my searching. Was curious if I should try and source a subframe for my tractor and run the BH76, or just hope I can make things work enough with the stuff off the B3200.