B8200 Dash Panel Idiot Lights

[wozDaddy]

Me again,

None of the idiot lights work when the key is on. I replaced the regulator, but still a problem. ???

Thank you,
wozDaddy

 

[ctmike]

Could there be a ground loose or not connected?

 

[North Idaho Wolfman]

Yes check the ground, and check the bulbs.

 

[wozDaddy]

Thank's, I'll make sure.

 

[RattleCat]

I had the same problem on a L3450. The traces on the board had worn off underneath the rubber grommet of the round electrical connector. I scraped off a little bit of the gel coating from the trace with a dental pick and soldered in a piece of copper braid to bridge the connection.

If the easy stuff fails start checking for continuity.

 

[wozDaddy]

Thanks for all your help !

I found the problem. : )
One end of a fuse holder was not making contact. (the fuse was good)

You guys got me going in the right direction.

Thanks' again !
wozDaddy