b8200 3 pt control box

[tdspurrier]

does anyone have any experience rebuilding one of these

 

[North Idaho Wolfman]

I've done a couple, they weren't that fuzzy though, Sorry couldn't resist.

What do you need to know?

 

[tdspurrier]

well the diverter valve and hyd pump seem to work well .. took the control box off and open the control valve section ( towards the front ) and found a lot of of what looks like congealed oil .. the issue was that at 2600 rpm I was getting some oil flow but the arms would not go up. Whats funny is that after removing and resetting the hyd pump prior to this they worked for a short period of time.

question is if I disassemble the entire unit what should I be looking for besides something obviously broken

Tom

 

[tdspurrier]

well I rebuilt the the 3 pt best I could , replaced the gaskets and the seals and still no 3 pt operation

Thanx for listening and all the support