steve
Member
Equipment
B7100HST, B5001DT/B5100DT, JD-111H, Chevy K2500 DuraMax, CJ-5, CJ-7, TJ jeeps
B7100HST owners, I need some help! I have a 1983 B7100HST that I’m trying to mount a RC60-71B mower on. Things were going well until I discovered that the mounting holes for the mid hanger bracket aren’t in the right place for the type of mower linkage I have. The holes on the tractor appear to be for the parallelogram type lift and the RC60-71B that I have uses trailing arm type lift. What I’ve ended up with is the mounting holes are too far back on the transmission tunnel and they are on the face of the tunnel. What I need is to have the holes further forward (about 4”) and built out from the tunnel (about 2”). So here’s where you can help. Could you measure your B7100 where the mounting holes are located in relation to the bolts that hold the front mount or some other landmark and how far they extend out from the transmission tunnel? With this info I’ll fabricate up a new set of brackets and be ready mow. Thanks!
Steve
Steve