B7100 Engine swap
- Thread starter tinker bob
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Nobody has ever done it, so I'm thinking there is to many differences between the two engines.
All the info I have say it's not possible without extensive rework.
I also think one of the kills to this is I don't know it the D902 has a drive for the hydraulic pump.
Bolt in options are the D750, D850, D950.
All the info I have say it's not possible without extensive rework.
I also think one of the kills to this is I don't know it the D902 has a drive for the hydraulic pump.
Bolt in options are the D750, D850, D950.
Last edited:
re: All the info I have say it's not possible without extensive rework.
or a bigger hammer
EVERYTHING will fit ,then
or a bigger hammer
EVERYTHING will fit ,then
My B7100 has a very, very tired D850?950? from a later B7200/8200. Someone did it, and it kind of works. They cut the very straight hood to accommodate the intake pipe. I have a D750 intake manifold that I'm going to install to fix that.