B6100E hydraulic

[Fluke631]

Hey all,

Hopefully everyone is doing well despite the virus going around.
I've got an older B6100E and trying to figure out the pressure, PB and return lines and how it is all working. I have attached a couple pictures.

Sorry for the middle finger wasn't on purpose

Thanks

 

[North Idaho Wolfman]

First picture:
Well it depends where it goes?

Second picture:
That banjo bolt is also a suction strainer / filter, that is the suction line for the pump.

Third picture:
That would be someones unique way of having attach a return / tank line.

Forth picture:
I'm soooooo offended.... Not
That would be where someone has done a unique job of taping the system, that the pressure line.
Look for the other end of where they would have cut the hard line and attached another hose to it and that will be your PB.

 

[Fluke631]

The first pic is going to the 3 point, must be the PB of the valve

 

[North Idaho Wolfman]

The first pic is going to the 3 point, must be the PB of the valve

You are probably correct!

 

[Fluke631]

Thank you Sir