B6100 Help with replacing parts please

[mfowler]

Just got a b6100 and used it for 3 hours and looks like someone did not put the axle back together correctly. I ordered a full new one on ebay and should be here soon.

Here is my issue. The pin holding the center "gear case" on and allows it to swing up and down... how do I get that out? Do i need to take some of the frame apart? Going to upload a photo with the image.

New user here and any help would be huge!

Cant slide it back toward the back of the tractor because the oil pan is in the way....

 

[Lil Foot]

You have to unbolt the frame section fron the engine block, as per post #2:
http://www.orangetractortalks.com/forums/showthread.php?t=21369&highlight=front+axle+locked

 

[North Idaho Wolfman]

Lil Foot nailed it!

 

[mfowler]

Ah that is what I was afraid of. Didn't know if there was some magic trick to it.
Guess Ill take a couple days off from work and do this.

I have a front end loader on it so that may complicate the job a bit or just add some time.

Thanks for shooting me to that post.

Matt