B6000 P/N 14412-60701 Jet Start Assy

[dvanpelt]

Curious if anyone has any information on how/where to install the P/N 14412-60701 jet start assembly on a B6000? I have had no luck finding any information so far and would greatly appreciate any assistance. Thanks

 

[North Idaho Wolfman]

Curious if anyone has any information on how/where to install the P/N 14412-60701 jet start assembly on a B6000? I have had no luck finding any information so far and would greatly appreciate any assistance. Thanks

First the B6000 can be a grey or not, give me the serial number and I'll tell you if it's a grey or not.

Second the b6000 never came with a jet start valve, but I guess you could add one.
I wonder why you think you need this?

This is a jet start valve:

Take the plug out and replace it with the valve:
Then route the vent to an added tee on the returns from the injectors.

 

[dvanpelt]

Wolfman,

Thank you for the reply! When I bought my B6000, it came with this and I was curious how it installed.

 

[North Idaho Wolfman]

Ok after quite a bit of digging.
It looks like that was an add on option for an extended run fuel tank add on.
Leave it sit on the shelf!

 

[dvanpelt]

You never cease to amaze me with the depth of your knowledge Wolfman! It’s going back on the shelf : )

Thank you again!