B3300 HST Pedal

[navspecwar]

When I got my B3300 2 years ago new(only 130 hours on it now), I could release the HST pedal and the tractor would quickly come to a complete stop.....forward or reverse. Now I release it and it seems to still want to creep forward or backwards. I have greased the linkage and always have, though it seems not to help. Sometimes the tractor will shutoff when I dismount and think I am fully stopped......then play with the pedal so she fires up again. Any suggestions or ideas/things I can try??
Thanks in advance, Chad.

 

[North Idaho Wolfman]

Get a service manual and adjust the center stop for the HST.
I'm not sure on yours but on other models it's pretty simple to adjust.

 

[navspecwar]

Thank you for the response, I will give it a shot.

 

[skeets]

And don't forget to clean the gunk out of the linkage too,, and I believe there is a grease fitting there as well give it a shot, that seems to be the biggest problem gunk and not enough lube

 

[navspecwar]

Thanks skeets.....will give it a look....