B2650 front quick hitch

T

tb82

New member
Aug 2, 2019
5
0
0
Worthington, MN
Hello! I have the opportunity to buy a front mount broom with all attaching hardware for a reasonable price. My question is if any of you know, or can tell me how to look up, whether a B3030 and a B2650 would have all interchangeable mounting parts for the broom/snowblower. So the front quick hitch, PTO kit, mounting hardware... and what is the support kit for the hitch? A dealer told me I’d need to order a support kit as well if I ordered new. Thanks for any help!
 
2

200mph

Well-known member

Equipment
L4740-3 Cab, FEL, Fnt Snow Blower L2185, LP Finish Mower, LP Rotary Mower
Mar 3, 2017
1,228
59
48
PA
Notes from Wholegoods 2015.

For B2781B snowblower:

Quick Hitch B2791A, (B2650HSD, B2650HSDC, B3350HSD, B3350HSDC) - Requires Quick Hitch B2714B & Mid-PTO Driveline B2793 (CAB)
or B2747(ROPS)

For B2779 sweeper:

(B2650HSD, B2650HSDC, B3350HSD, B3350HSDC) - Requires Quick Hitch B2714B & Mid-PTO Driveline B2793 (CAB) or B2747(ROPS)

B2776

Quick Hitch Frame Support Kit Necessary for when the B2301/B2601/B2650/B3350HSDC tractors that do not have a loader subframe

Hope this helps.


It would help some if you posted the snowblower and sweeper models you're trying to purchase.
 
Last edited:
N

nbryan

Well-known member

Equipment
B2650 BH77 LA534 54" ssqa Forks B2782B BB1560 Woods M5-4 MaxxHaul 50039
Jan 3, 2019
1,166
708
113
Hadashville, Manitoba, Canada
tb82 said:
Hello! I have the opportunity to buy a front mount broom with all attaching hardware for a reasonable price. My question is if any of you know, or can tell me how to look up, whether a B3030 and a B2650 would have all interchangeable mounting parts for the broom/snowblower. So the front quick hitch, PTO kit, mounting hardware... and what is the support kit for the hitch? A dealer told me I’d need to order a support kit as well if I ordered new. Thanks for any help!
Click to expand...
As far as I know the snow blower, broom, and a blade quick attach to the same hydraulically elevated sub-frame. That sub-frame also carries the mid-pto drive extension shaft for the blower and rotary brush.

So if you get the broom and all attaching frames and hardware then yes, you can hook up a snowblower or blade to the same frame. The blower would need its own telescoping drive shaft to connect to the frame output shaft.

I have a hydraulic chute deflector control which used the bucket curl circuit on the loader valve. I assume you have a front loader.
 
You must log in or register to reply here.

Top Bottom