ARX6500 GENERATOR PROBLEM

Gene1952

New member

Equipment
KUBOTA ARX6500 GENERATOR
Jan 28, 2022
2
0
1
MAINE
I have a Kubota ARX6500 generator that will not run. After doing some troubleshooting, I found that there is no power to the fuel solonoid at the bottom of the carb. I also found that the on/off switch was physically broken so I replace that. Still no power to the solonoid nor do I have any power to any of the connections on the switch. I can't find a schematic for this generator online. Any help or thoughts as to what could possibly be wrong would be greatly appreciated. I work on a lot of generators, mowers, etc and this one has me stumped.
Thanks in advance.
 

Jim6100

New member

Equipment
B6100e
Jan 25, 2022
10
3
3
36
Florida
i dont know anything specific about that generator. but if you have no power to any of the conections on the switch i would follow the wires from the battery maybe there is an inline fuse or fusable link.
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,286
4,851
113
Sandpoint, ID
Yep fusible link or fuse, usually located near the starter.
 
  • Like
Reactions: 1 user