AIR COMPRESSOR oil pump

Orange man hero

Active member

Equipment
LX2610HSD
Mar 12, 2021
343
42
28
Wasilla, Alaska
I use one of these on my pick-ups. I am old and do not like getting under vehicle's. Anyone use one of these air pumps to take out oil and hydro fluid. The lower twist cap marked
OIL seems a good place for the suction pump. It's slow but works.
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
34,926
10,194
113
Sandpoint, ID
Sorry, but it wont do you any good to try and suck the oil out, as the cap does not directly allow access to the oil pan where all of the oil is sitting.
This is also the same for the hydraulic system.
You will need to pull plugs and drain to get the oil and hydraulic fluid out.
 
Last edited:

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,
Apr 2, 2019
13,468
6,066
113
Greensville,Ontario,Canada
Sounds like it's time to call in a favour or two from family, friends, and neighbours!! Sure;y at least ONE of them can help you out,especially if you've ever used your tractor to help them.
 

Orange man hero

Active member

Equipment
LX2610HSD
Mar 12, 2021
343
42
28
Wasilla, Alaska
Sorry, but it wont do you any good to try and suck the oil out, as the cap does not directly allow access to the oil pan where all of the oil is sitting.
This is also the same for the hydraulic system.
You will need to pull plugs and drain to get the oil and hydraulic fluid out.
Thanks, good to know!
 
Last edited by a moderator:

Thatoneguy

Member

Equipment
Kubota b7200
May 20, 2022
67
12
8
Southern California
I have used a hand siphon to pump oil out of a gm4.3 v6 through the dipstick tube on an old boat i used to own. My current boat has a remote line i can push out of the hulls drain plug.

I know the method of using the dipstick tube for removing engine oil from boat motors is common practice. I dont think it would work on a tractor case though.