2012 Kubota RTV 400CI

Faith

New member

Equipment
2012 Kabota RTV 400
Dec 26, 2024
4
0
1
Gilmer Texas
Serial # 10282
Kubota GH 400 ES 06OHV gas engine
Engine turns but no compression. Can this engine be saved? Is there anything I can check to find the problem? They no longer make this engine.
 

whitetiger

Moderator
Staff member

Equipment
Kubota tech..BX2370, RCK60, B7100HST, RTV900 w plow, Ford 1100 FWA
Nov 20, 2011
3,299
1,712
113
Kansas City, KS
Serial # 10282
Kubota GH 400 ES 06OHV gas engine
Engine turns but no compression. Can this engine be saved? Is there anything I can check to find the problem? They no longer make this engine.
What is the compression on each cylinder?
 

eserv

Well-known member

Equipment
BX24, A1000 Kubota Generator
May 27, 2009
2,187
170
63
Hardisty, Alberta
What is the compression on each cylinder?
These engines had a problem with getting gasoline in the oil when operated in colder climates. Have you checked that and changed the oil? These were built by Subaru,
 
  • Like
Reactions: 1 user

whitetiger

Moderator
Staff member

Equipment
Kubota tech..BX2370, RCK60, B7100HST, RTV900 w plow, Ford 1100 FWA
Nov 20, 2011
3,299
1,712
113
Kansas City, KS
Only one cylinder and no air coming out.
Duhhhhhhh, you have an RTV400, but I was thinking of an RTV500 which has a 2-cylinder engine.
Have you removed the rocker cover and checked that the valves are opening and closing?

You can also remove the sparkplug, insert a stick of bronze rod through the hole resting it on the top of the piston, and turn the engine over by hand. If the piston does not move you have a broken connecting rod.
 

Faith

New member

Equipment
2012 Kabota RTV 400
Dec 26, 2024
4
0
1
Gilmer Texas
I will tes
Duhhhhhhh, you have an RTV400, but I was thinking of an RTV500 which has a 2-cylinder engine.
Have you removed the rocker cover and checked that the valves are opening and closing?

You can also remove the sparkplug, insert a stick of bronze rod through the hole resting it on the top of the piston, and turn the engine over by hand. If the piston does not move you have a broken connecting rod.
I will test that thanks