ROPS Canopy / Roof Project / Lights / Fan

NHSleddog said:

View attachment 46367

I wanted to add a roof to my new B2650 but I didn't want one that was rigid. My last tractor had a fiberglass roof and I ended up cracking it in a couple places. Molded plastic seemed like the best solution. I had no luck finding a tractor specific roof that I really liked. Part of that was cost, part of it was esthetics, part of it was size. The best part was, it was a project I did with my son. I did the engineering and cutting, he did all the welding and fabrication. We used all 1/4" and 1/8" stock. About $400.00 for everything

I settled on a 54" EZGO RXV Golf Cart Roof ($230.00 new delivered)

View attachment 46368

I mounted it backwards so the hand-holds are right where you would want them.

The frame sits captive on the top of the ROPS.

View attachment 46369

View attachment 46372

View attachment 46373

I mounted some LED's and a rear view mirror.

It looks factory, it works great and it is strong enough to handle towing in the wind and hanging from the handle. Overall I am very happy with the choice.

Click to expand...

seanbarr said:

Phenomenal! I picked up the same canopy with handles and I may have to rethink about reversing it. How much flex is there on the canopy?

The direction the handles face would be determined by how you use the canopy. I made a similar lid with a golf cart part. I put the handles to the back because I don't use them. I'm 6'-4" and when I get on my tractors I'm leaning forward, and usually have my right hand on the fender handle and the left hand on the top of the loader tower. I never reach up when getting on. Anything above, I'm just interested in clearing!

You will need a heavier frame with the handles to the front, exp. if you plan to grab the handles. That is also the heavier end of the canopy.

Click to expand...