Was using PTO mower today trucking along fine then lose power and down to a crawl after few minutes would pick up again. Took mower off drove alright but now in 3rd gear just barely crawling. Used to pop a wheelie in 3rd. Any ideas what the problem is?
B7100 very slow moving in 3rd gear
- Thread starter AaronFarr
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Is the motor losing power or is the tractor slowing and the motor still staying up to speed?
D you have any free play in the clutch pedal?
Check adjustment as per attached.
If you have free play then likely clutch is worn out.
Dave
Check adjustment as per attached.
If you have free play then likely clutch is worn out.
Dave
Hi Dave clutch must be worn out now. Adjusted a few weeks ago went okay now little more than a crawl in 1st 3rd and R.