Search results

Recently pick-up a well used L2250DT It had a major oil leak from the transmission and rear main seal on the engine into the clutch housing which was almost full of oil. My question is the PTO clutch would not completely release. Today I readjusted the clearance on the dual clutch bolts and the...

Last week I pickup a rough L2250 dual clutch that was leaking hydraulic fluid between the clutch housing and the engine. When I split the tractor about a gallon or 2 of white fluid poured out from the clutch housing which should be dry. The hydraulic fluid is white due to water intrusion. I...

For sale is a very good condition steering box off of a B7100 HST. The box was removed when the tractor was converted to hydraulic steering. Included is the steering wheel. I believe my tractor was a 1995. $200 Enfield, CT

Kubota d722 3 cylinder engine for parts or rebuild,engine runs but was ran low on coolant and overheated, good parts engine $250 call 8604854612 This is NOT my listing. Contact the listed number northwest CT craigslist.

I recently purchased a B7610 and hoping to install my old snowblower (a B2650) that I was told came off a B7500. The snowblower fit my B7100 with only minor modification. The subframe fit the B7610 again with only minor modification however the mid driveshaft is about 5 inches too short to be...

Just bought a B7610 and was wondering if anyone had a work shop manual they may no longer need and that they are willing to sell. I didn't see this tractor listed on kubotabooks. Thank you Dana

Everything went very well reassembling my B1759 engine until I got to the head. The manual stated to check top head clearance to see if a head gasket shim is needed. Looks like to me once the head is on and torqued, if the piston to head clearance is under the spec. (.0237 to .0315) you need to...

Found a 1995 B1750 HST Bi-Speed turn with a Woods loader on craigslist the price was good even though the ad said "engine overheated replaced battery, water pump and head gasket" Looked into getting it running today but it was not firing at all and there was a smell of starting fluid. Valve...

Removed the belt driven power steering pump I had previously installed on my B7100 today and installed a priority valve from surplus center. No big deal installing the valve and modifying the hydraulics. I didn't expect to see how all the hydraulics have slowed The priority valve has an...

Found this on Craigslist thought someone might be interested. make / manufacturer: Kubota I have a PTO reverser for a Kubota B6000 10 spline PTO to standard 6 spline! Works as it should seals could be replaced. Sold tractor no longer need the reverser. Asking $650 OBO. Please call or text me at...

I read a bunch of posts on adding rim guard for ballast but since I wanted to do it cheaper I went with the windshield washer fluid fill. First attempt was using gravity to flow the fluid into my tires. I picked up a slime tire fill valve which allowed a garden hose to be hooked to the valve...

Today while clearing another foot of the white stuff the Kubota crank handle universal kept coming apart. Grabbed a 1/2" drive swivel socket and welded it to the chute control handle then pinned it to the chute worm. Works better then the original. I will make it look a bit prettier if the snow...

With all the snow this season I got tired of getting on and off my B7100 to angle the rear blade. The blade is only used to scrape the driveway clean. The ram is a 3 x 10 from tractor supply. The 3/8 hoses and fittings are from surplus center. The ram is plumbed into my loader curl / dump valve...

Saw this ad on Hartford Craigslist sounds like a decent project. B6100E Kubota, not currently running. Great winter project! Includes User Manual and hard-to-find original Parts List. Ran strong for many years, began smoking a few years ago, but still ran well. Then clutch began to slip this...

This 48" snow blower has a new lift ram, new hoses, new drive gears and new drive chain. The bearings are in good condition and turn freely and are quiet. Also included is the electric PTO clutch which drives off the front of the Kubota crankshaft. $475