Search results

Number 9, I never seen the floating top link adapter for the Land Pride Quick Hitch before. Although it seems its made to work with the hook still attached to the Quick Hitch, it also appears that you might get just a little more downward movement on the floating top link if the hook was...

Number 9, Have you seen this:http://www.tractorbynet.com/forums/attachments/attachments/125746d1238706803-harbor-frieght-quick-hitch-toplink-swinging-toplink-adapter-hf.jpg It's made to adapt non quick hitch compatible equipment to work with your quick hitch. To use it you take off the hook on...

Number 9, If you didn't already buy your Harbor Freight Quick Hitch, read the two attachments I am including. Some people who get the Harbor Freight Quick Hitch need to do major work on them to be able to use them...

Bought an L3800 last year. It came with the draw bar, no extra charge.

Thanks phildac. That figure sounds reasonable for all that you had coated. I was checking out Line-X on the net. Seems its all in the prep work. Good adhesion depends on good sanding, or in this case good sand blasting. Thanks very much for the info. Can't wait to see the completed project.

I am interested in the Line-X on the floors. It looks great. I have a new L3800 with just the orange paint on the floors. I was thinking of making floor mats, but was concerned with trapping moisture and encouraging rust to form. Line-X seems to be a better solution. Since the Kubota floors have...

Hi Rob, I found this regarding what to look for when buying a used Ford 8N. Is this what you have in mind for your Used Kubotas Buyer's Guide, but written more specifically for Kubotas? If it is, I think it's a great idea. The Used Kubota Buyer's Guide could be organized in three parts 1)...

I put the L3240 right hand grip on my L3800 a few months ago. It fits like it was meant to be there, (no filing required), and matches the left hand grip perfectly. Its Kubota part number T1060-29450, Right Hand Grip; you will need two metric flange nuts too, Kubota part number 02771-50100. They...

Don't know about a BX, but the work light connector that was on my L3800 harness was under the left fender, up around the rear light. In the photo the green connector is part of the work light kit I bought from Kubota. The work light connector on the tractor's harness was taped up, so it wasn't...

Longleaf1, my L3800 manual (copyright 2010) says the same thing about not using CJ-4 oil. However, it looks like Kubota went 180 on this advice in 2012. See this link: http://www.kubota.com/service/LubricantMaintenance.aspx So now Kubota says CJ-4 oil is required in my motor, mine is an...

If you find one that works, please let us know.

Beautiful tractor. It will be a shame to get it dirty.

That's beautiful! Looks like it will do the trick.

Welcome to the forum RD. You came to the right place. Lots of good fellas here ready with helpful advice. Very nice tractor. BTW, my first car was 6 year old 1967 289 Mustang fastback, painted dark blue. Sure wish I still had it.

Thanks for the comments. I really like the new knob. I put one just like it on my car's stick shift a few years ago.

Just wanted to share a photo of the shift knob I put on my L3800 today.

Thanks for the heads-up, Profnohair. Just saw the show. It was cool. It was a challenge for two guys to 1) grade a gravel drive in 6 passes, and 2) to bush hog 3 foot tall grass in a marked off area using two HST L3800s. Looks like the next show uses the same tractors doing other chores. Best of...

He's laughing???!!! I would be crying. Didn't they talk when they were dating?

Here are a few photos of the light. The instruction sheet that came with the light says it made for L3130, L3430, L3830, L4330, L4630, L5030, L3200, L3800, L4600. It sure is bright. I think its a 35w watt bulb. It was real easy to install. The first photo shows how it connects to the connector...

Well I installed the L8327 rear work light kit on my L3800 yesterday. It was a very easy installation. Since the wire harness on the tractor has a connector already in line, the work light just plugs in. The light bracket is about 1/8 inch thick and attaches to the ROPS. I don't know the wattage...