Search results

What a fun day I had. Fairly cool out this AM So I though I'll get the lawn mowed. So I jump on the 2120 and start mowing. About ½ way through I stopped to grab a small branch that had fallen. I forgot to shut the PTO on the tractor off so it shut the engine off when I raised up off the seat...

I thought I had posted this previously but was not able to find it so i'll post it again. having relied on my well-paid employees to service my tractor's ( BAD IDEA). I just finished the 400 hour service and while doing so decided to investigate the slow reverse issue. What I found may be of...

Having bought many new Kubota's over the years, (The most recent a GR 2120) it seems that with each new unit I find more little problems, IE: 1. Belt idler arm tweaked. As the bushing in the arm wore a bit, it allowed the pulley and belt to start to start hitting the deck which resulted in the...

Can someone shed some light on what's involved to adjust the front axle pivot on a GR 2120? It's at 400 hours so it's due. I haven't gotten around to buying a service manual yet :rolleyes: I've noticed recently the axle housing has some markings from hitting the frame and am hoping this is the...

Having recently installed a soft cab on my B3200 (a story in itself :mad: ) The "FREE HEATER" supplied with the cab was rated at 300W which would pull 25 amps. HMM the Dynamo only puts out about 14A or NICE!!. So that led to researching upgrading the charging system. Another long story...

In the process of upgrading to an alternator on my B3200 I started the motor a few times with the dipstick tube in place but without the dipstick in. It was late so I called it a day. This morning I found small drops of oil that apparently had come from the top of the tube and dribbled...

Being the tight-ss that I am I recently purchased a downloadable Service manual for my B3200 from the following site thinking they were associated with Kubota. https://www.kubotamanual.com/store/products/kubota-b3200-wsm-service-manual-download/ I did pay more than other sites had it for...

Does anyone have any experience, comments or suggestions with soft cabs for a B3200. I'm thinking a soft cab as it would be easier to remover during summer use. Any help is appreciated thanks TJP

Wondering if anyone knows of a soft cab manufacturer for a B3200. I've looked online and haven't found much. It almost seems as though they have them for everything but the 3200 or am I just not looking in the right places ? Currently does not have a canopy and just looking for something to use...

just wondering if there is any input on this issue. I have a 2017 GR2120 that was bought new and has been serviced by myself using Kubota fluids and filters. It has right at 350 hours on it and has began leaking fluid from somewhere on the top of the hydro. Not a profuse leak but enough to...

looking at buying a 2020 GR2120 that has .8 hours on it. Just kind or curious as to whether this is typical or excessive. I know it's not a lot but being a 2020 makes me wonder if it might have had a problem and returned. The hydro is really noisy compared to my older 2120 & other units I've...