Search results

Greeno ,thanks , I found info on the rear one ,but was worried about the front

Have a b2710 it's has turf tires,rear tires are 13-6-16 fronts are 23-8.50-12 ,I want to go to r4 tires,what size do I need to replace the turfs,do I need wheels and tires thanks

Well after about 2 years of doing every thing I could think of,every thing people told me ,don't know how much kubota hydraulic fluid and filters I've bought ,changed out the pump to no effect ,my son told me run it without the Fil cap in,bushhoged for two hours ,not the first drop of oil came...

Used them 6x6 blocks for years

I just put a towel on mine when it gets hot weather,keeps you from sweating so much

Used a slip clutch on a 3600 ford ,and 6ft bush hog ,didn't slip,broke the shaft in the transmission,tore up 2 gears,bust the front plate,had to break the tractor in 3 pieces,so beware of the slip clutch,they have to be maintained

Ok ,already have ,but will do it again,thanks

Well I changed the o rings on the hyd block got the leak stopped,but did not solve problem

Wolfman I've cleaned tractor,only leak I can find is a drip at the block where the hyd lines mount to the tractor,will that cause it to suck air into the system,and the o rings on the dip stick are not fitting good ,thanks for your and every one else's help

Thanks wolfman,when I get Time I will do that

Ok Finely got some good weather,thank the lord,I took the fel off ,hooked the Hyd. lines coming from tractor together put the finish mower on and mowed the lawn,same thing happen oil still puking out,so must not be fel causing the problem

Thanks everyone for your help,when the weather gets better I will take fel off and see what it does,but we have rain about ever day and I don't like working in the rain ,thanks

Torch ,thanks for the info,I cleaned the screens about 6 months ago,and it quit puking the hyd fluid out for awhile,thought that was the problem ,but started it again,cleaned them again ,this time didn't help

They look the same,i try to put them back from where I got them ,but they could have been mixed up before I got the tractor,I think I saw somewhere where they had a different number,if so they are not the same ,so I don't know if I have them in the right place or not

Another question,on this b2710 it has 2 screen filters one on each side,they look the same ,are they the same,they will enterchange,but are they different,does one go on one side and the other on the other side if so how do you tell them apart,thanks

Aftermarket

Not very maybe 30 min.

Wolfman my son took the pic,two lines comes out of Hyd block on tractor the red tape marks one line where they are hooked up,I drained all the 303 out got s udt to put back in cleaned the screens ,I can see the coil spring inside the screen they look clean but who knows,I forgot to tell about...

Is this the pictures you’re asking for.

It has a filter screen on each side witch have been cleaned,I also wondered about the inside of the screens because you cannot see in them,it has one screw on filter on left side of tractor if your setting on tractor for the 303 this is the only time it has been it,I'm going to drain it out,just...