Search results

I myself am a big guy and had the same problem with the range lever on my 2501.I took a couple of adjustable wrenches and bent the lever ,above the lever guide,toward the fender to a 45 degree angle and problem was solved.I did this in the first hour of ownership.

I just performed my 50 hr maintenance also.I used Valvoline premiun blue 10/30 and super udt2 and kubota filters all around.My tractor is noticeably quieter when cold now but has more whine when at operating temp now.

I think I got lucky with my filters ,as they were not overly tight.I also had just a small amount of metal dust on magnet and just a hint of some brass dust in drain pan.I think it looked good all around ,for the break-in oil change.

I just finished the 50 hr service on my 2501 also. When changing oil ,I refilled with 6 qts of Valvoline 10w30 and it is showing about qt too high on dipstick.While changing hst and hyd filter I decided to change fluid to SUDT2,to my surprise while cold, it is quieter, but has a much louder...

CDI produces Snap-on torque wrenches,at least in 3/8" size ,because I have one of each and both were inspected by the same guy and inspection cards are identical other than lack of Snap-on on card of CDI wrench.Just some info.

Member by the name Joel K -has did the same as what you are wanting to do and he boosted hydraulic pressure too.Look at some of the older post.Just for the record I'm gonna do the same thing when warranty has expired.

Re: R4 set Sold-R4 set has been sold

Just to be the odd duck -I have a 2003 f-150 4wd that I bought new.At present it has 271,000 miles on it.I drive it every day,it has never had the plug out of the differentials or transfer case ,never had power steering or transmission fluid changed or added to or the coolant added to or...

I have a complete set of R4 for a 2501/3301/3901 for sale.My tractor had 25.9 hours on it when replaced with R1.Located in East Tn.These may fit other models ,experts on this forum would know that information. Rears are loaded with methanol. Price for wholegood set is $2000...

I don't have a lot of hours on my 2501,but mine steers very well with a load.Without ballast the loader will easily out lift the tractor,very good loader.

Wher do these numbers come from ?I have seen them on other post.

Hats off to Kubota wholegoods -I ordered a complete set of R1 tires and wheels Monday ,dealer called Wednesday said he had them and I installed today.***128077;***127995;

I'm the same as you.Today was the FIRST time I have ever used the glow plugs to start.It didn't fire immediately so I held over for about 10 seconds ,and it lit right up.It is stored in an unheated open shed.

Look around for an old floating hitch Ford/Dearborn disc.I find it is the best of both worlds.It has the convenience of being 3pt ,but when it is in the dirt ,it floats and contours to the ground like a good pull type because the 3 pt is floating around and just "pulling" the disc.The top link...

Thanks for the answers.

If you’re going to use the tractor as a tractor ,I would go with R1.I made the mistake of getting r4 and regret it .Just ordered as set of r1 today.

Does anyone know how many gallons of fluid is in a 2501 r4 15x19.5 tire?I am replacing them with R1 and going to reuse what fluid I can.I have a 55 gallon drum and wondering if it will hold fluid from both tires.

Yes I do have a loader but no it wasn't any help.The equipment wasn't sunk it just couldnt get traction to go up the hills.The R4 just will not dig or shed the mud.At the first sign of muck the tires just slick over and are useless.It makes me frustrated that my 4wd tractor will not go places...

I got the 2501 stuck moving some equipment around ,down on a hillside,then got both of my 4wd trucks stuck trying to get in back up the hill.Enough for me at 24.7 hours the R4 tires have got to go, going to place an order on wholegoods for a set of R1.This has been an expensive mistake on my...

This may be too simple thinking on my part,but could the pedal be removed and a simple piece of flat bar bolted in its place to make a lever forward/reverse? Full speed of hst might not remain but at least the tractor could be used,not in a speedy process using loader but it would be usable at...