Search results

He lost the safety clip that holds the large rear pin in place that secures the subframe to the tractor frame. This put most of the weight of the blower pushing down on the driveshaft. 🤦‍♂️ If he’s lucky he can get by with a new pto case and driveshaft if it’s bent. $300 for the case and $400...

I installed the Third valve kit (TFK7) for my B2650 cab. It installed and works perfectly. Your welcome to use these photos as you need.

A buddy sent this to me this morning, he has a front mount SB on his LX 2610. 🤦‍♂😮🫠

I was looking for a front mount blower for my B2650 other than what Kubota has listed, the 2782. I had a loaner for a winter and wasn’t impressed with the build and performance vs my LP pto SB1064. I looked over the LX series blowers as they are built much heavier like the Land Pride. The only...

Any update on this? mine has been at the dealer 4 different times since 2019 and the leak always comes back. Now it’s leaking again and I’ll just live with it as it’s more of a seap leak that collects dirt. Almost all the used LX and Bs I’ve looked at have this same leak.

I just looked up these parts on MESSICKS. One is $192 and The other is $159.

I take that back, my K Connect was made in Canada, the driveline (drive shaft) was made in China.. The top box is the drive shaft. I can’t upload pics as they say there to big 🤷🏼‍♂️🫤

I picked up my LX 2980 in a crate, assembled and installed myself. The blower is made in Canada. the driveline crate had a big label “MADE IN CHINA”. Hope mine lasts 🤔😐.

What did you find leaking?

How has this blower been holding up for you? I’m considering getting one for my B2650. I'm curious if this undercarriage will work with my belly mower mounting. It looks like your undercarriage is mounted to the same spot in the front.

Picked up my tractor today. Kubota sent a rep/tech up to help diagnose the leak. They verified the gear case wasn't warped and instructed the tech to replace the gasket. The service department stated they had another B2650 come in with the same leak recently and need to make the same repairs.

Think I may have found my issue. Kubota issued a new gasket for the gear case cover. This is where mine is most like leaking from. Part #130

my leak seems to be coming from the lower part of the front engine cover. I’ll try again to find the areas on the parts diagram you mentioned.

Where are these located?

It’s dry in that area. It looks like it’s from the front engine case gasket.

They have replaced my oil pan and the same leak is still present. It looks like its coming from the front engine cover Behind the frame.

Dropped my tractor off today to fix the oil leak again. The dealer gave me another B2650 to use while my repairs are being done. The unit I have now has 367 hrs and has the same engine leak. Is this normal on these B series tractors?

Stock halogen has one power wire and is grounded through the body of the bulb. My LED has its own ground wire that I plugged next to the OEM ground. As stated above, one or two wires should work.