Search results

Farmer Brian I have added hydraulic swivel capability to my Landpride RB0560 . Parts 4 x 9 x 3/8 steel plate Qty 2 1.25 x 3 inch steel rod Qty 1 1.5 bore x 12 inch stroke Prince Wolverine series cylinder (Swivel eye at both ends) Steel tube 0.75 id x ?? od x 3 inch lomg Qty 2 Various...

I own a BX2380 and I did install a skid plate similar to the ones already shown. I have to remove it when using the MMM but it is less than a 5 minute job to remove or install. Replacing a broken fan is a bit of a job and the skid plate provides some level of peace of mind. I would definately...

I have a BX2380 with a SpeeCo quick hitch and a 5 ft Landpride rear blade. I had the same problem as you. I cut a 2 inch wide by 1/2 inch deep piece of steel from the blade where it interfered with the hitch. I cut this out of one side of the blade only and make sure when I rotate the blade the...

bluedunn I had the remote kit installed on my BX2380 about a year ago by the dealer. Initially I had a problem in which the hydraulic cylinder would move very slowly in one direction and normal in the other direction. Another subscriber had exactly the same problem. I traced the problem to the...

I own a BX2380 and I did have the leaking coupler problem. The problem was repaired at the dealer under warranty. They changed some of the items at the quick coupler but I do not know the details.

I have a BX2380 with a rear 5 foot RB0560 rear blade for snow removal on my gravel and interlocking brick driveway. I tried skids on the rear blade but was not that happy with them. Next I tried a piece of foam rubber from a TSC stall mat sandwiched between the mould board and the cutting edge...

I own a BX2380 and an RB0560. When angled to the max the blade is a few inches wider than the tires. My BX is not much heavier than your tractor and can pull and push the blade. I never run out of horse power but I quit often run out of traction with my turf tires.

Magnum63 I own a BX2380 and RB0560. I use the RB0560 for snow removal and grading on the driveway. In the spring after the driveway dries out it is somewhat hard and the RB0560 has trouble grading. I usually loosen up the gravel with a homemade multi pronged digger. After that it is easier to...

I own a BX2380 and use a Landpride RB0560 for snow removal. The RB0560 can be offset by unbolting the blade and reattaching in an offset location. I have never done this and plow snow with the blade in the centered position. I did have problems with the steel cutting edge and tried shoes which...

I own a BX2380 and did have a problem with the FEL quick attach coupler leaking. This is a known problem with BX80 series tractors. Mine was fixed by the dealer under warranty. The fix involved changing a number of the quick attack parts. I do not know if your warranty is transferable or still...

I own a BX2380 and have used it for 2 winters now. The temperature gauge stays on the very low side of the range in the winter even after an hour of snow work. I mainly use a rear 3pt 5ft blade and sometimes the bucket. Throtle is around 2200 for this work and provides more than enough power...

John I had the same problem on my BX2380 purchased in May of 2017. In the first year I had the FEL on and off about 10 times and twice the quick coupler leaked oil. The amount was drops per day once and a drop per minuite the other time. To correct I usually removed the FEL and re-installed...

I purchased a Kubota BX2380 in the spring of 2017. So far I have 3 issues with the tractor and I would like feedback or advise from other BX2380 (BX1880 BX2680) owners on Issue 3. Issue 1 Radiator screen. When I removed or installed my rad screen it seemed to bind near the bottom of its...