Search results

My bx2680 was delivered with a Ldmd pride RBO560 back blade, seems shoes arent available for this model, any one know if he shoes from the other series would fit? i don't know the spacing of the bolts, but it looks the same between the dif lines. TIA

I have 650 hrs on my tractor and grease it regularly, while cleaning things up the other day i noticed one grease nipple gone on the FEL and another a few turns from falling out, had to remove loader pins to pull arms out far enough to get new grease joint on. 11mm wrench and check them all...

I met my brother at a dealership to look over a used B2650, it has 680 hrs. 60 degrees temp, I turned the key and it fired imediately, (like an old straight six). i asked the salesman if they had ran it before we got there, he said no. My B3350 never fires that quick, it takes prob 3-5 seconds...

Ive owned my 60” finish mower for 3 years, gets used about 6 hrs a week. Spring clean up time and i change the gear oil every spring with a suction tube, time to fig out where the oil is coming from that is coating the gear box, while removing the vent on top to change gear oil it appears the...

When i turn my headlights on, the red hazard indicator lights up, just the switch, doesnt turn flashers on, Is this normal? noticed last year but overlooked it . thanks Sent from my iPad using Tapatalk

Is the recommended pressures for the rear tires the same when they are filled with beet juice? Working on softening the ride, lots of mowing to do this summer. Can i drop air pressure a bit being the tires are filled? B3350. Turf Tires Thanks Sent from my iPad using Tapatalk

I have a clarion radio with about 25w per channel, i replaced the factory clarion cone speakers with 4” kicker coaxles. They sound better, but would putting foam behind them help the bass? I know there are limits with this, just trying to see if theres a little more bass to be had. Was kinda...

Does anyone have a source for getting the multi color caps for the hyd outlets on the front, (fel hoses) B3350, red, white, blue, yellow, mine have stretched and fall right off, thanks in advance Sent from my iPad using Tapatalk

At 650 hours its time to adjust the valves, E manual does not list the B 3350, but it does list the B3150, would that be the same engine? Sent from my iPad using Tapatalk

I have a b3350 with front blower and a rear blade, the shoes from both are making rust stains on my exposed aggregate driveway, the shoes get rusty and leave the rusty metal shavings on the driveway, boy will i have a mess in the spring, i have seen wheels mounted on both but cant seem to find...

I’ve noticed the rubber washers on my cab mounts to frame can all be moved around easily, indicating that that’s the factory specs or they are worn, the bolts are tight and at their limits. Any ideas on this one folks?

Hello all, I’ve been reading up on using the shims to increase lifting power, the article I watched pertained to a bx series which has the hyd adjustment on rear of tractor, where mite it be on the b3350? Thx in advance

looking to put a 12v actuater on my chute defector, amazon has a bunch, and it looks like i need around a 6” stroke, and i prefer the side mount. can anyone help with a proven design? ,other than the 700 dollar kubota part. thx in advance Sent from my iPhone using Tapatalk

Has anyone had any luck trying to quiet these things down? I spend a lot of time mowing grass and it does get old, I don’t like ear phones because a lot of times if there is sumthing going array with the machine or mower you hear it before it becomes a disaster. If I use my cruise control the...

I didn’t know anything about the problems with the def system on these tractors when I bought my 2015 with 100 hrs, I have had 0 problems with mine, whether it’s 30 below 0 or 80 degrees, the last week I’ve been torturing this tractor, pulling monster rocks out of the ground, one rock has to be...

At 400 hrs my left hyd steering hose decided to start leaking right on top of the front axle, no sign of any abuse, but I’ve been working it hard pulling and carrying big rocks, anyways, removing hose was a real treat, after grinding down a 19mm wrench I was able to break it loose, now waiting...

i have a B3350 with a la534 loader, 4 hoses too hook up to tractor, after cleaning and flushing the couplers i still cant get the top or the bottom couplers too lock in(there are 4 total inline behind the loader frame and are a bitch to get to) any ideas? or do i need new couplers? tractor is...