Search results

Hello all, I have a L4560 hoe attachment that until recently worked great despite its age. The Dipper/pick pulls in very sloooow, all the other hydralucis are good. I had the bucket and dipper/pick cylinders rebuilt ( leaked a little) thinking maybe a seal was the cause. reassembled and...

Please delete post. Chris.

Hello all, I am in the same boat as others and search some older threads. Kubota wants ~$400 per side for my tie rod assembly. Both the inner and outer are toast on both sides so this is almost a grand to replace. I have been searching catalogs for the inners 35080-4460. I can fab just...

Hello All, I have a L3450 and need of the outer tie rod end. My dealer says 175 ++ for just the end and ~350 for the assmbly (inner and outer) I can not find the part number for the outer but the whole assembly # is 35080-44640. I already cut the female coupling off so i can weld in just...

Hello all, Silly question alert. Is it possible my glow plugs show light while cranking only? I honestly thought this tractor did not have any. (The yanmar in my boat didn't) I have never heard a relay, my dash is a mess, only the fuel gauge works. Anyway, it always starts. Even...

does anyone know where to find/buy/or have replacement buckets for a 4560 backhoe? I have the 13 inch and am looking for some thing larger. L4565 or l4564 Chris

Hello All, I have a la650 loader on my 3450 tractor and need a new bucket. The original is 60" wide and my tractor track is 72 wide. It is a real pain not being as wide as the track. I have been searching for a off the shelf bucket and it appears a LA703 bucket is 72 wide and should work...

Hello, I have a L3450. I am in need of new rear tires. I always knew something was a miss because in 4wd i had drag. OEM calls for 12.4-24s (45"dia) I have 17.5-24s (49"dia) I was going to buy the 12.4s but they call for a much narrower rim. My 17.5s are on a 15 inch wide rim. any ideas...

Hello All, Can anyone direct me to a replacement filter for my L3450 Kubota numbers are; 30400-37710 30401-37580 I think napa gave me the wrong ones last time, maybe to fine of micron because in the cold nothing wants to work. On the backhoe attachment, the spring loaded bypass ate the...

Hello all, Does anyone know where i can locate one of these eye bolts in the picture. Finally got around to fixing up my stabilizers and i am missing one eye bolt. it is 5/8 thread with a .500 hole. everything i find with 5/8 thread has a 1.250 hole or bigger. I can fab something up but...

Hello all, I am leaking fluid badly from the shift cable assembly at the transmission. I called kubota and was told there should not be fluid beyond the transmission case and the cable assemble should be dry. Is this correct? In the picture, when i start the tractor fluid gushes from the...

Hello all, L3450 After fixing my cracked brake case i drained and replaced all the fluids. I do not see or can find any bleeder valve and with past tractors it always bled by itself. Everything operates as if there is still air in the system. I used UDT from Napa that is listed as Kubota...

hello, just changed my trans fluid due to a cracked brake case and i thought i read in the manual it took 12.2 gal of UDT. Well, I began to fill the case dumping 5 gal buckets and before i reached 12 gal, it over flowed. I have a sight glass and I obviously blew right past that. Any clue...

Hello All, First post,,, glad i found the site. I have a L3450 and i broke off the drain plug that is on the brake case housing. (three point pin came out and the lower arm jambed into the cast iron case) I am stuck at the axle case. I removed all of the bolts and everything in the way...