Search results

OK, thank you all

OK, i'll do that. Making the topic i thought that i could swap the inner stopper with the middle component to increase the lever arm increasing the distance between the two active components. I'll update if the problem worsen

bump bump bump

Hi, i have a bulltra b1-14 and i'm having some problems while using the plow. Basically i have 2 troubles: The fixing pole in the photo is bending I suppose it has to work pulling the plow both side. For this reason in both side the pole is bending to the rear. The lifting is always very low...

I***8217;m going to write how i solved the problem to help other people that could have a similar problem but i***8217;ll not write most of information to keep the post as short as possible. If someone need other informations feel free to PM me or to as in the thread. To solve the problem i...

i solved, it's easy. I removed the 4 screw B and unplug the related block. I unscrewed the rounded piece A so i clould separate the cylindrical piece from the squared one. the cylindrical piece has 4 pieces inside, 3 of them can move longitudinally. The spring is located in the squared piece...

The Workshop manual seems impossible to have: i can't find it on internet (found in german but i can't read it) but i found a workshop man (WSM) calling where i bought the tractor (they trade used tractor, mainly bulltra and aste series). So now i know that removing the 4 screws (allen) (called...

I removed the coil from the ev (see picture above) so i think the valve must be closed (all mpvements stopped) but when i start the motor the movement lift. (I assume that the coil only enable the lifting and that when the coil is de-energized the valve should automatically return to stop...

Relating to this photo: must i remove B first and pull the valve or must i remove the fuel tank and to look for screw in the upper side? What is the utility of other valve component? Thanks

I think that the crack is a bad joke done by the flash (shadow), i can't see it in the other photos i did like ones in this thread http://www.orangetractortalks.com/forums/showthread.php?t=23051 I'll check better later. Can you explain me how to umount the valve? (It's under the diesel tank)...

[solved] problem with electrovalve Hi, today i was investigating my tractor problem (on hydraulic lifting) and i enabled manually the lift movement (pushing in the front of the eV). I noticed IT was hard to pull but i thought it was so because i didn't use it from month. When i released the...

How did IT end? I need the manuale too, i can't read german but i can try using google translate. Thanks

:( can someone help me?

HELP =_= Problem with Bulltra B1-14 Hello, my bulltra B1-14 had a problem the last time i used it. I was using it lifting and lowering the plow with the right lever when suddenly the up-down movements stops working. When i realized that the plow was stopped (ignoring the lever position) i...