Search results

OK, not sure these are all must haves, some are and some were wants.. I have a 2013 L3800 HST and the following are all Land Pride - 72" power rake 66" tiller 72" box scraper 72" seeder 60" grapple with 3rd function valve 72" disc 84" landscape rake 72" rotary cutter post hole digger with 6"...

Funny as I did some brush hogging in a local park prior to it being notice that it was low on fluid. No ripped lines or anything. I was in pretty heavy brush to. I know the stick can poke up anywhere to. I almost knock the fuel bowl/cup off one of the times. Glad it just was crooked in the...

I have a L3800HST with about 165-170 hrs on it. I recently had a 3rd function valve installed. When I took it to the dealer to install that 3rd function valve, I was told it was low on fluid, so they put almost a gallon in it. I had to take the tractor back because they installed the valve...

You guys were right, it is not plumbed correctly. Got the scoop on how it should be from the land pride service guys and its a easy install. The dealer needs to put everything back to just how it was before the attempted install, then do it how it should of been from the start. It goes up to...

Worst part is the next closest Kubota dealer is at least twice the distance away. I would probably still buy from them as the sales guy has been good and helpful. Nice guy to. Will see how it goes. I will get the store manager involved in this to, so he is aware of things if the service...

The RR lines come out of that block under the right side of the seat and go right to the back to a bracket with quick connects on for my rear remotes. 1P goes into that block on the front side, kind of below the RR. How nuclear I go, depends on how this is handled. It is about 20 miles each...

I cant hardly wait to see what the dealer does. They cut that long line to put the T in it, so thats one thing they will have to replace. The 3rd function valve coems in a kit that has the fittings and hydraulic lines that run to near the end of the loader arms. If they indeed acknowledge they...

Ok guys, thanks for the help. I tried to label the lines and got some pictures. I uploaded them with a description to photobucket. You can see them by clicking on the link below. Hopefully we can get this figured out...

Yeah, I think they got something wrong to. What makes me the maddest is this was the first 3rd function they installed and would not call Land Pride to make sure they got it right. I looked before I took the tractor up there. There is a line that goes from the loader controls, down under the...

I have a L3800 but that would be something I would be interested in. I may crawl under the tractor and see if I can figure out something I can make at home here that would do the trick. I know I definately will find something to protect the fuel filter/cup. Thats out in the open and with time I...

ok.. I just got a Land Pride SGC1060 grapple and the 380-153M 3rd function valve for my L3800HST. Just got it all hooked up. The grapple moves slower than molasses. But if you hit the lever for the rear remotes while running the grapple, it picks up some speed. Whe I picked up the tractor after...

I have been doing some brush hog work at a local park. MOwing some brush and some I root out with my loader. I apparently hitmy fuel bowl with a stick as it was leaking, I turned it a ways and it kind of skipped, still leaked, then I turned it a little more after the skip, it stopped leaking. I...

I just got a SGC1060, got the 3rd function valve isntalled today and got it home. I need to add 2 short hydraulic lines and Im ready to go. As far as welds, I havent looked it over good yet. MIG welds are stronger than TIG though. In MIG, the wire gets penetration. In TIG, thats more a surface...

Yeah, I plan to have somebody else do it. My salesman told me this would be the first time they instaled this 3rd function valve. Granted they work on this type of equipment all the time, they shgould be able to handle it, I'm not a fan of me being their guinea pig and it taking a long time...

I am getting a land pride 3rd function valve installed on my L3800. It shows in online installation instructions to hook it to the power beyond ports. Where exactly is the power beyond ports on my tractor? A picture or diagram if available would be great. Also, is there a bolt or fastener of...

The 3rd function valve cost me $705 and the SCG1060 grapple was $2284. Both are Land Pride. We are still hashing over the install cost. Dealer told me $450 for installing the 3rd function as it comes and $700 to add the hoses up to the grapple to make it operational. We are still trying to find...

I recent ordered a Land Pride SGC1060 grapple and a Land Pride 3rd function valve kit to go with it. Both will be going on my Kubota L3800 HST tractor. I am pricing the installation of this valve and have a question. Looking online at the installation instructions, it says they were written...

I did the same thing with mine. But I also didnt seem to get that much out of it when draining the oil either. I chalked that up to it not being as level as it should of been. I drained some out til it was jsut at the full spot. My book says 7.5 quarts for the L3800. 6.0 quarts for the L3200.

I had the same thing happen with my L3800. I posted on here and somebody had the solution quickly. Follow the cable from the PTO on/off level to where it attaches to the shaft that goes into the tractor. It might look like nothing is binding it up, but take some good spray lube and spray up the...

I give you credit as you have more patience for this than I would. I would bet that if you had an attorney contact Kubota, that would about change their tune right there. They dont want that negative publicity. Also now days the negative stuff travels very fast with the internet. Sounds like...