Search results

Thanks!

I have lost steering with my L225. If I spin the steering wheel to the left, it seems to raise up and I can see the threaded rod. Is it possible there is something under the steering wheel cover that has broken, a key or something, or is it more serious like a gearbox problem?

My old L225 needs a front wheel. Tire size on it is 4.00x15 and it’s a four lug wheel. I’ve had no luck finding one. Any Suggestions? A,so, is there a way to convert the hub to a more available lug configuration? Thanks!

Hi - I have an old L225 Kubota with a loader that I think is the LA844. I've had the hydraulic cylinders repaired in the past to the tune of about $400 and just blew one of the bucket cylinders. The OEM specs are as follows: Stroke 18.5 in. (469 mm) Bore 2.17 in. (55 mm) End-End 29 5/8"...

I ended up buying some foreign car fuses and taking the metal off and screwing them in place. It worked fine. I think taking the wire from a glass fuse would work too, but the 5 amp glass fuses have tiny wires, so these worked better. My tractor is all re-wired from the melt down and everything...

I wondered about that too. Given the apparent rarity of these crazy fuses, this is probably the way to go. Thanks

What do you call the original flat metal fuses that were in the dash fuse box with the grey cover? I need two 5 amp fuses and cannot find any info on them. This is the picture of the fuse box you posted. I need fuses or I have no lights.

This is what I've found on ebay. I haven't been able to find a single picture of the actual fuse online. I'll take one of my tractor and post it. I guess I could wrap this in place of the broken ones.

Hi - first off, thanks for the help with my wiring meltdown and helping me find where the mystery wire went. I'm a history teacher by trade, so novice is actually a compliment to me when it comes to tractor repair. I have everything rewired now but my headlights don't work. The grey fuse box on...

Thanks for the diagram - it worked. The wire went into the harness coming off the regulator, which I would never have noticed without the drawing. Still not sure what it does, but it's hooked up now and working. Still trying to find those 5A fuses on the box located on the dash. Fuse wires are...

Hi, newbie here, so thanks in advance. I melted the wires on my L225 from the ignition switch to the starter and a little beyond. I have replaced all the burned wires bit can't remember where the black wire coming out of the generator goes. It is part of a plug with a couple other wires coming...