Search results

Mine has the same light on I replaced the filter and it's still on. Is the a way to reset the light ?

i have a l3010 4x4 with 355 80 x D20 small terf tread and would like to switch to a ag tire what size do i need ???? my tractor has 27 8.50 x 15 ag tires on the front now

well found the problem with my the control valve for the loader was only half on. used a screw driver and turned it the rest of the way on and it works like new now. i kinda feel dumb now haha

mine is a gst but still having the same problem and its making it very hard pushing snow

test light on both sides of the switch to see if currant is going thru it ironically the tractor started right up today no issues but the glow plug light will not go out still ??

ok all the safety switches are working properly i am getting a clicking sound in the relays in the dash not sure which 1 but im guessing 1 must be bad ?? which is for the ignition ??? and how would i test them ?? or if its clicking does that mean its bad ?? thanks for everyone's help

thanks it a L3010 and i dont think theres a safety on the clutch or it is bypassed haha but i will check them all tomorrow

the ignition switch is new

just ran a jumper wire from the battery to the little wire on the starter and it started right up ugh now where do i go to find the problem

hey bob iv been having the same problem with my L3010 i just came back in side heres what i did turn the key on took the red jumper cable hooked it to the positive post on the battery and took the other red end and clamped it to a screwdriver then unhook the small wire on the starter and touch...

sometime it has power to the dash lights and such sometimes no i checked the fuse i cant see the inside of the fuse but i checked the wire has power on both sides of the fuse

mine does not have pwer in any position it has a new ignition switch what should i check next ??

what v will a good battery have ??

hey wolfman should that small wire have power or is it a ground ?

mine does the same thing

going to get a new ground cable today now i think iv traced the problem to the small wire on the starter it has no power with or with out the switch on i put a new ignition switch on it today then all the lights started working again but it would just make a clicking noise so i checked all...

hey all i have a L3010 gst and i wont start.a few weeks ago it was cranking slow so i went and got a new battery and replaced the terminal ends as well it started great then cranked fast. a week later hop on it and it just clicked i was pissed so just walked away. few days later hopped back on...