Search results

Done a lot of searching on the internet and can’t seem to find what I need. I’m working on the hydraulics for the 3ph, And looking for torque specs on the cover bolts, and the banjo fitting. Any help appreciated. I’m guessing there aren’t too many of these models around, as I posted other...

I’ve had issues for a while now with my 3 pt. It pops the snap ring on the left side of the shaft (50), the shaft migrates right, and the left lift arm falls off. The only thing I can figure at this point, is the groove in the shaft has been damaged and not holding the snap ring. My though...

Could someone please take a measurement of the lift arm height in the full up position. Was having some problems as I think the arms were going too high. I made a change, and I’m not sure they’re high enough now. Thanks

Ran into this problem las year, thought I had it solved, but apparently not. I have a B7500 host...when using a back blade to pull snow.....more importantly, when the blade is angled...I pop the snap ring off of the hydraulic shaft...and the lift arm falls off. I verified correct snap ring and...

Been using a rear blade for snow behind my B7500. 2 times in the past two days Ive had this problem. The snap ring on the shaft that operates the lift arms pops off....the shaft shifts to the right and the lift arm falls off. I realize I have the blade angled some....but I wouldn***8217;t...

Been having a hydraulic leak on my LA302 Loader. The fittiing in the dump cylinder seems to be welded in....but there is a small cap on the side of that fitting (not sure really why), that can be removed with a 1/8" allen wrench. It is sealed with an "o" ring, and that was what was leaking...

OK..so I go to do my first oil change on a B7500 Original owner said it was serviced by dealer just before selling. Has all "K" filters...and he has oil change and services highlighted in his owners manual...so I have no reason to doubt him. Drain the oil....clean and reinstall the...

Found the noise I was hearing was from a loose hub. I removed the wheel,and hub and wedges and cleaned everything. Now my problem. Both wedges are notched...I assume one is so the bolt head wont turn when trying to loosen the nut. The problem is...BOTH are notched...so when you try to...

Im using a box blade with about 300# of weights as a ballast for my FEL. Are you guys using anything (chains) to support the weight and take the load off of the hydraulics.....or not???

I have a B7500 HST, and Im getting a noise from the rear axle.( I think). Its sort of a loud "creak". I marked the tire to see if it occurs at the same point of rotation...it didn't. I tried a video...maybe that will give you an idea. Any thoughts appreciated https://youtu.be/VpGlAGvBPJM

Was thinking of a 3pt trencher attachment for my B7500. I cant believe the prices. Does anyone have one of these??? and how do they work. Seems like I can buy a used walk behind for about 1/3 of the price. I dont understand why they are so expensive!

Was going to weld some hooks on my bucket. Do I need to disconnect my battery......or remove the bucket from the FEL? Didnt know if there were any electronics that could be potentially damaged. Thx

Anyone done business with these folks. Tried to place an order online...but couldn't complete the transaction. Kept getting referred to a security captcha. So I tried the "click for online chat"..........and got no response. Makes me think I want to do business with someone else? Anyone...

I purchased a 4 foot box blade at an auction yesterday. Not that it really matters, but I was trying to determine who manufactured it. The sides are 16x22, 5/16" and it has 3 ripper shanks. Any thoughts would be appreciated. Couldn't find any markings at all.

Ok...so its -2 this morning. Gonna clear the driveway, about 20secs of "glow plug" and the Kubota fires right up.....not terribly happy mind you.... 3pt picks up the weight box, lift the bucket....tilt back, tilt down..........no down bucket. Control wont move forward. Do I have moisture...

OK..I know its not the prettiest...but it works. The headlights on my B7500 are worthless, and with the FEL, even worse. So I needed some lights for the snow season. I bought 2 LED 27w from ebay, and used some unistrut that I had on hand. Since I use the tractor for bush hogging and...

Trying to learn about my..new to me...B7500hst. In the manual it makes reference to a water drain plug to drain water from the clutch housing. I locate what I assume to be that drain, in the rear of the bell housing. Remove the plug...and out come what I believe to be hydraulic fluid. The...

While playing with my ..new to me.. B7500 HST I noticed a noise that appeared to be from the rear axle. Was moving some dirt and back dragging with the FEL, also in low range, and mostly in reverse. While moving under light to moderate load, the noise is a kind of "bang". Sounds like you...

Hey all: I recently purchased a B7500 with a LA302 FEL. For the first 4 or 5 hours everything worked great. Now my "down" movement of the lever is sticky. It doesnt move smoothly...feels like it hits a detent and then drops. All othe positions seem to be ok. Fluid looks clean...but...