Search results

My tractor trans/hydro fluid started coming out the vent under my seat today. Very foamy, like the head on a beer. I think it may be an air leak in the rubber hose in the suction line. I found a spot that might be the leak. Do I need to put new fluid in when I change the hose? Am I on the...

I have a 4 ft king kutter xb tiller. The oil seal on the side gear box next to the tiller shaft has started leaking. Does anyone have any experience replacing this or have any suggestions. I don't want to tear into it and then end up with more problems.

So I have always thought that my B6001 was the same as a b6100. Well, come to find out after replacing the rear axle seals and trying to find new hubs, by b6001 actually cross references with a B6000. I found this out, because I had ordered the wrong axle seals and hubs. Any thoughts or...

Alright, both of my axle seals are leaking on my b6001 (same as b6100), before I jump in and attempt the repair myself, I'm wondering if there is anything I need to watch out for (like things popping out at me as I take the axle case off). It is my understanding from the parts diagrams that...

I know this has been talked about some before, but I'm trying to find a 18 mm 22 spline pto shaft to go on the front pto stub on my b6001 (the old one just spins as all the threads on the adapter have worn down). All I need is the female adapter piece as I will then weld it onto the current...

Now that I've seen the steering article by Mr. K, I decided I needed to replace the upper bushing on my B7100 as it has some play in it. Are there any tricks to popping off the steering wheel (mine is stuck on), or removing the bushing and installing the new one. Thanks for the help.