Search results

I recently removed the radio from my 2005 B 3030 with a cab. The radio wasn’t working anyway, I literally just cut the harness behind it. Tucked it up with tape so that way there was no bare wires, touching anything. Didn't think any of it, but several weeks have gone by and now when i hit the...

I have the B3030 and I have the top and tilt kit that I am installing for my rear remotes. I bought 2 foot long hoses for both pistons. The top seems totally fine. The tilt cylinder if you point them to the right, they go behind the tire before connecting to the rear remotes. I am thinking...

Hi I am adding rear remote hydraulics to my b3030. In the process of working on the top link i can see how the quick hitch frame is in contact with the adjustment latch of the lower arms of the 3 point. Here are a couple pictures. I was wondering if there are recommended adjustments here to...

I have a B3030 that I just had the rear remotes added to the machine. I am looking to oder both the top and the tilt cylinders. I have taken the measurements of the current threaded rod links. Top: 17 1/4 - 26 3/4 Side: 14 1/4 - 17 5/8 Hydraulic Options: Category 1 Hydraulic Top Link 17...

I had the opportunity to buy a b3030 with a cab and it has a couple of good breaks in the roof at the front. I used epoxy to seal up the cracks, I was thinking about using RV roof tap to cover above the seam to give the roof some extra protection. I wanted to see what you all thought about...

I am looking for a used cab tractor. The b3030 seems like a good solid machine but similarly priced to the 2650. The 2650 is roughly 10 years newer. Any reason to go with one model over the other assuming prices similarly with similar low hours? Thanks for your perspectives.

The block heater works amazing. When it is plugged in tractor starts up almost immediately. Normally the tractor wants me to use the glow plugs for 5 to 7 seconds. Even when I park it in a heated garage that is roughly 50°F., I still have to use the glow plugs. does anyone know why it behaves...

Hi All, I wanted to see if any folks have experience with diesel extreme and striction remover to address blow by. I bought a B8200 HST 4wd recently and I am working through many maintenance items the previous owner didn’t do. You can see the blow by coming out of the valve cover breather tube...

Hi All, I bought this machine a couple of months ago. I am seeing exhaust come out of the breather tube. I have seen several posts about using MMO to unstick rings. For this tractor, it’s not burning any oil. I have changed oil and filters what is obvious to me is this machine was not...

I have a B8200 hst 4wd and it needs front tires. The current tire size is 24x8.5-12. Kubota says that size has been discontinued. They are turf tires today. Seems like the answer is to go with 23x8.5-12 I am curious what others have done is it better to just get bigger rims and a different...