Search results

Thank you

@007kubotaguy is who you need to talk to. Great guy very knowledgeable

You can swap the cap from a b7100 that has a valve. I have a few if you need one

Yes the standard cylinder cap is the same between b6000 and b7100 so you could put a valve cap from a b7100 on a b6000

Thank you sir

Yes sir. This one is for a customer that put a d950 in a b7100 and still wants to use the front pump on his b219 loader. I was just trying to help him find one. But its probably gonna be easier to make one

Good morning. I don't have a part number but looking for the adapter to bolt onto the crankshaft pulley of a d850/d950 to give it a splined shaft to use a hydraulic pump. By chance anyone out there have one laying around?

If you need any help with pictures or parts id be happy to help

Sorry i do not. I think we talked yesterday on the phone.

Bx25 is a 60 series and bx25d is a 70 series. Only real difference is the brake pedal moved to the left on the bx25d. Your panel isnt really a good guage as the original panel likely failed and was replaced with the updated version which had the digital tach on the right side as you have. Its...

Had a customer with same issue. Verified everything was correct and adjusted correctly. Ended up being a crack in the clutch fork couldn't see it in the tractor.

If you can find one the bh4974 subframe is made for the b7800 which should also work on the b2910 and works with the bh75 and bh77 backhoe. They dont list it as working on the b2910 but i don't see why it wouldn't. Problem is finding one.

You cannot put a tee in a pressure line. Fluid will always take the path of least resistance so youll have flow but no pressure. You need to come off the power beyond of the loader to the backhoe and then from the backhoe back to where the power beyond hose connected back to the block to feed...

B7100hst is considered live pto for the fact that you don't need the clutch to drive the tractor or switch gears. Gear drive version is not

If you can put a tiller or cutter on it and put it under load see if it works normal or if it stalls out. That'll help determine whether its the clutch or hydrostat issue

B8200 is a lot more tractor than the 7100. But hst is much better for loader work. If your going to do much loader work look for something with power steering in my opinion.

You have a valid point. In this case the panel is nothing more than a mechanical tach, couple lights and couple analog guages and short of the plastic on the front being cracked are not known for water getting in them. Panel has nothing to do with the tractor starting or running. One could...

Yes it just pops out. Just be easy you don't want to break the bezel around it. Will it stay running if you hold the keyswitch in the start position? Obviously don't hold it there long just a couple seconds as a test. If so you likely have a key switch failure but it could also be the fuel...

The 3 bolts are plugs on the hydrostat and yes there are orings there. Just remove and replace orings. The hole dont worry about nothing there. As far as the shaft leak yes it could be steering gearbox leaking. There is also a vent on top of the clutch housing. The boots are just dust covers...

No it will not. 80 series is completely different in the hood area