Search results

  1. hagrid

    East coast 1/12-13 snow check-in

    Brentwood has around 2.5" and I dont think we're getting any more.
  2. hagrid

    Let's Share a Little About Ourselves

    Hello Mr. ATFE!
  3. hagrid

    Oil Issue

    Oh my. Could be hydro lock via the crank case recirculator.
  4. hagrid

    Engine wont turn 360 deg. either way so I bought it!

    Are those lentils on the #2 piston? I advise against using combustion chambers for grain/seed storage.
  5. hagrid

    bh77 cracked/missing weld ?

    I've seen worse. Those are a little on the amatuer side of MiG but I dont see fatal errors. You should be fine.
  6. hagrid

    Primer Crimp Removal

    Now you've done it. You've got a whopper of a post coming your way.
  7. hagrid

    Roasted Kubota

    I dont get it.
  8. hagrid

    Roasted Kubota

    Yes, you told us that already. That's why my finely hewn post was intended to produce uproarious laughter. What we have here, in humor terms, is a failure the likes of which has never been witnessed in recorded history. And it has my name all over it. :(
  9. hagrid

    Roasted Kubota

    These fires are directly attributable to the use of tapered roller bearings in the front axle final drive. I will be installing ball bearings in my front axle and sleep the sleep of the saved and thankful.
  10. hagrid

    What's your hobby?

    Wreaking havoc on special interest forums.
  11. hagrid

    Moore's Law

    Quantum entanglement will solve the C/distance problem.
  12. hagrid

    Diesel Cold Weather Additive

    I wonder if naphtha would serve well as an anticoagulant in diesel fuel. I think it would satisfy any lubricity requirements.
  13. hagrid

    Was at my dealer today..

    OK... good info all around. Now then, what part #s do I give Messick's to get tapered rollers so these ball bearings dont strand me?
  14. hagrid

    Where do you buy your batteries??

    My pappy and I use Optima yellow top batteries. They migrate from vehicle to vehicle as they are traded in. Expensive but you won't replace them very often.
  15. hagrid

    Thinking Of Getting Into Welding?

    I saw the diode. It cuts out one half of the AC cycle. It also pulses the arc since half the cycle is deleted. Nifty.
  16. hagrid

    Odd Colored Piston Head

    I read somewhere that the picture/word exchange rate is 1:1000.
  17. hagrid

    Thinking Of Getting Into Welding?

    I wonder if that guy has seen a dermatologist recently. Too much exposed skin during his stick and MiG demonstrations.
  18. hagrid

    B3350 Prediction Confirmed

    B3350rev2.0
  19. hagrid

    need some advice from my expert Kubby friends with snow pusher

    The front axle is being lifted as the blade encounters increasing resistance, hence the loss of yaw control.