Search results

Thank you, I used OEM Kubota Orange 1 because it was such a close match, a quart can, not rattle can so hopefully it won't fade in the sun. So many other implements have faded, not happy about that.

The last piece of the puzzle, boss finally got my stop bracket bent! Holes drilled and painted Not sure what purpose they serve, this is not spring loaded like a snow plow? But installed, none the less Added a set of tire covers for UV protection, those implement tires are not cheap

Hooking is easy, just dropped it down on the log and lifted, Un-hooking is not as easy, I'm thinking on that!

Nothing exciting but I got 14 plus cords of wood delivered in log form, and have to move them around to be able to cut and split. Put a spreader bar across the lip of the bucket so things don't get bent out of shape.

50/50 John Deere Green/Yellow, not as vibrant as on the David Bradley forums? New Implement Tires and ready to go!

Never posted the last bits of this project; Rubber covers on the handles/adjusters Re-did the wheels, pretty ugly on the inside, at least one Cleaned up and Rustoleum® Rust Reformer primer Primered And pianted

I know of no non-JDM model to the L2202, L2002 would be the L275, probably won't help?

Blade painted, 3-Point hitch installed Done til the wheel paint arrives

Pivot and assembly points painted Kubota Orange 1 and assembled Two color coats, blade will be black ID Tag placed Decals applied

Zerk fittings added Axle pivots greased After wire wheeling, Rustoluem® Rust Reformer primer on the rusty areas Primered

Inspected and re-greased the wheel bearings, all in good shape for the age, seals are still pliable and useable Springs removed for replacement from the height adjusters Not sure why this was added, but not stock, so it goes Now I need a square head nut for the bolt What are the...

Back to work on this, finally. Started to break down the wheel pivots Still a bit of bushing material in there, not going to mess with new bushings, will probably add zerk fittings for future greasing Removed the height adjusters Missing one of the blade stops, hopefully my boss, with a...

Added a layer of wood in the raised bed. Two truck loads of garden soil, 4670# / 3.59 cu. yds

Added 3/4 ton of rip rap to the raised bed, trying to keep the pic-a-pans (ground squirrels) out. They are a terror here, hope they are weight lifters ! Chicken wire or poultry netting just rusts away. This 'Harbor Freight thing' was left on the property, Worked Great! (even after 14 years+...

Did a bit of excavating for a raised bed. I received this in lieu of payment for a small job last year. Finally decided to get it out of my way and put it to use. Eventually to be covered with an 8 X 8 greenhouse.

Had some warm weather finally, got the last decal on the Tiller!

This is for the B7000, I have no idea how close if at all it is to the B7001?

The screenshot I posted earlier was from www.tracpartz.com, while this one also has four terminals they do not list it for the B6000, nor do they have a listing for a B6000 starter switch, but it is considerably cheaper. Coleman According to Messick's this should be the part number but it is...

On the B6000 it should be just like my L1500, a single start / pre-heat switch, depending on position?

Yeah this one is always just been a single screen, it cleaned up really good. The photos I see online for my particular engine also show what looks to be a single screen filter.