Search results

I did virtually the same thin. No leaks here as well.

I fixed that problem once and for all yesterday

Wow.................only the 8th of November and cabin fever is already setting in !!!!!!!!!!

It is a agri-fab which came with my Case 25DX before I had my Bota'. It is very similar to the Kubota bagger system.

Started using this Befco spreader when I still had my Case. I fabricated a rubber and aluminum shield on the tractor side to keep the sand salt off the tractor. Works awesome.

I have a large lot covered by 26 mature, large long needled white pines and am surrounded by 37 acres of hardwood bush. I generate a tractor trailer load of pine needles, pine cones, acorns and leaves every year. To combat this mess in the easiest fashion, I have a BX2680 with a 54" mower and...

Not likely..............I don't leave it unattended around desperadoes and bandits......LOL

Went ahead and did the conversion similar to John T's.

I went with the 54" Commercial front mount on my BX2680. Greatest thing I did. Have been thru two winters with it. I can switch to my loader in about 5 minutes. The new style K drive system is a snap to get on and off. DO NOT EVEN THINK ABOUT A REAR MOUNT, trust me I tried it and it sucked.

Nice job, well done. I have everything together to do not only my FEL but also my K Drive, F/M snow blower and my power angle F/M broom. I'll keep the entire factory setup and put it back on when this tractor moves on. I am still going to put the 4 females on the tractor. I have 4 really...

John T, FYI the threaded to AN fitting you need for the FEL hose connections carries a Gates # of QA9B I am going to make a billet aluminum plate for the tractor side of the mounting plate and put the 4 female couplers on it. I need 10 male ends for all of my implements so 10 males are alot...

No, I just called him last week. Since I park the loader for the winter I thought there was no rush. I had put my K Drive and F/M Blower on and now I see those are leaking too, so it appears that the leak is in the base plate on the tractor. I am getting everything together to make a...

Call my BX2680 "Bodi"

I do, but if I'm going thru the trouble and expense I am going to convert over to pioneers. This flat face nonsense is a folly. Kubota knows it but still continues using this crappy system.

Delivered Nov. 2017, just turned 332 hours.

Mine appear to be.

You are absolutely right. I am on my 2nd set of couplers. This set lasted 3 months. Dealer mumbled something about they have changed something in the bottom section again. I am all for going to individual Pioneers. If anyone has pics of the conversion I would love to see the finished...

Idling in driveway for 5 minutes gives you a 3" puddle. Parked over night doubles it but I suspect that is due to build up on the manifold body and residual drip from the underside. Warm fluid doesn't take a lot of quantity to make a big mess. Just plain annoying especially on a quality piece...

I thought about the same one but decided that it is a piece that gets used once or twice a year, unless you are going to use it commerically, then I can get quite a few rental $$$$ use for that money plus I don t have to store it when it is not in use.

Yes Brad, this one pretty well grinds down the leaves as the vac system has it's own blower which is 3ph rear pto driven. Between that and the mower they are pretty well mulched.