Search results

add a little power service to your #1 diesel... it cleans and lubricates the injection system. the white container also adds some anti gel properties...

Re: What to buyB2650 or B3350 as a former owner of a b3350. even if kabota has fixed the problem's. i wouldn't buy another one.. the b2650 lacks the power of the b3350 also the lower rpm of the b2650's mid pto, makes mowing a bit more challenging. i would still be hesitant buying a b3350, due...

i can second about turning it down. lots of dust to deal with. i'll have to check out the goose neck drain fitting. to turn the exhaust sideways...

same issue with the quick hitch. my cousins husband gave me a quick hitch unit as a gift.. it only works with a couple of my implements. the other implements, i would have to modify either the hitch or the implement, to get them to work... if i knew where it was bought, i would trade it for...

if your area has high humid conditions and your evaporator is freezing up. use recirculated air instead of fresh air setting on your a/c controls. having less moisture in the recirculated air will reduce the conditions for the a/c to ice up...

check out the design of a potato harvester. you might find a way to adapt the design to harvest your rocks and haul them away from your garden...

after owning a B3350 for a year and most of that time it was in the dealers workshop. the most i had it in service was one 25 hr period with the shortest of a hour and a half. before it needed to be looked at or hauled off to the repair shop. they did refund my purchase price minus a years worth...

i have a B2650 with a cab. it's nice having the heat and a/c. i use a 72" mm mower. the fel is larger on the 'b' and can move more material. also you will be able to move more material having a tractor that weighs more. traction is a big deal when moving material with a box blade or scooping...

just used a wiring pinch clip connecting the two wires before the connector, to plug in the seat switch...... taped it to keep moisture out. easy to restore. just remove tape, use screwdriver to open clip, use pliers to pull the metal clip from the wires. tape up and insert into plastic wire...

my seat switch started to kill the engine, randomly. i un-plugged the switch. haven't have the engine die once afterwards.. (unless i use the key)..

B2650-3350 hsdc a/c & heater... just checking with owners of these models of tractor. if your in a cold climate, are you keeping warm??? i'm currently in central texas, the a/c cools you eventually, it takes a long time for the unit to catch up with cab heat and the sun.. it would perform...

i finally got a b2650, i miss the power of the 3350. but not the regen issues.. i received my purchase price back. but there is no way kubota can return the year i wasted with the b3350... if there was a way to get a engine that is used in the b3350 without the epa garbage. i would have it in my...

if you are doing a large area, and already have a three point. a option is to have a second set of blades, with a finish mow cut on them. it won't be perfect, but will work. the best option for a nice finish, is to use the horizontal rotary blades, in a gang mower, depending on the size and...

on top of what you had replaced, my b3350 received a hotter thermostat, larger alternator, new particulate filter unit, all sensors and it's still wouldn't run properly. took over six months to complete a buyback. received full purchase price, which the b2650 price increased to near the same as...

if you get a b3350, be prepared to run it at full throttle until you are ready to shut down.. as it won't make enough heat to keep the system working. in this area, you will not find a b3350 on any kubota sales lot... a few are still in repair shops. some are working fine for the lucky few...

my pto clunks loudly at higher speeds. so i have the engine in the 1200-1600 rpm range...

i was moving some gravel. i still had my post hole auger attached. i backed up too close to a rise of ground. and the end of the auger hit the ground, rises up and hit the frame of the lower window of by b260 hsdc. shattering the lower pane.

build some bat houses and put them around your property.. each bat house occupant(s) will take care of a few thousand mosquitos each night.. i'm building a bat motel, using 6-8" high plywood box, like a bird house only no hole and the bottom is missing. a scrap of carpet is nailed/stapled to...

i have deep sand, then clay. the sand turns into quicksand when it gets soaked.. i learned after watching swamp loggers. that won't have to have my tractor towed, winched out. if i use a stack of pallet flats and lay them out where i need to go. they are pallets without the spacers for forks. so...

it would be nice to have a camera for when i'm hooking up equipment or backing to drop something.