Search results

I like how you implemented side protection! I did not think of that when I made my guard. Mike

Be sure to post photos! Mike

Glad to hear you’re up and running again! Mike

No, not really. My main concern was protecting the grill/radiator. Mike

Thanks for the compliment, yes tires are loaded, I also have been leaving my brush hog on for extra ballast. Mike

Here’s how I did mine, it attaches by what I’ll call “pinch plates” I couldn’t bring myself to weld on my new tractor. All from scrap I had on hand. Mike

I‘ve had mine for a week or so, still learning to use it well. I too have been thinking on how I could improve its function. I was thinking about welding or bolting on some “cutting tines” to mine. I’m clearing a lot of overgrowth with a lot of small trees. I’m using a chain and old tire as sort...

Thanks for the inspiration 1badDart, I added one to my tractor Too. Mike .

Very clever!

Thanks for the idea Designdude! I decided to make a set too. Tractor supply mat $28.00 Tools used CAD (cardboard aided design) empty Miller Lite boxes work well, usually seem to have them around…. utility knife and straight edge for straight cuts. jig saw for all other cuts (supporting mat as...

I‘m no pro welder either, pretty good with the follow up grinder though. I took a few more pictures. I hope they help. One front closeup and two from thebackside. Mike

Thanks for the compliment! I found the materials at Home Depot, (mesh was 24”x24”) the cross pieces are just angle iron. I recessed the LED light bar with two additional flat bar pieces of metal welded to the top angle iron piece. The lower section is the tricky part, due to the tilt forward...

Thank you for the compliments! Mike

Hi all, I recently bought a new L3901, HST, loader and Land Pride grapple. While I was waiting on the grapple (back ordered) I wanted to improve the radiator protection. I decided to incorporate a led spot/flood combo also. Pretty happy with the results. Mike.

Here’s how I added some protection to my L3901. I used CAD (cardboard aided design) to come up with these protective covers. The filters/hoses just seem too exposed for my comfort. Mike