Search results

I see several people using this seat http://www.agrisupply.com/compact-tractor-seat-flip-type-brackets/p/64951/ this is the one i have on my B series http://www.agrisupply.com/compact-tractor-seat-black/p/75183/ it needs the flip up brackets so it will mount to most tractors...

there are a couple of good threads in the tires and wheels section of the forum that can help with the tire selection and also adding rim guard for weight. might be worth a look btw dont worry about over working the tractor with the tiller. The B series was originally designed for use with a...

Have you tried the dealer? My brother in law has a bx series and just had to replace his front tires. They ordered him a set, $70 each both were mounted on new rims ready to install on the tractor.

did a little digging for ya Farmer, here are a couple pdf files that contain an owners manual and the service manual for your tractor. It should help with several questions. owners manual...

According to the owners manual I have it says a 14 inch single bottom plow is the recommended size for it. Depending on your ground it could still have trouble with that plow. 4 wheel drive and r1 ag tires help tremendously as would a set of weights or have the tires filled with fluid. The...

see if this helps you with the camshaft plug and your oil pressure issue. I saw this video a while back on you tube where the guy had low to no oil pressure. This was a pretty common problem on the B6100 and B7100 tractors as well as some others like the L175 and L185...

I just replaced the pivot pin and bushings in my front axle this spring. The loader really speeds up the wearing process on those parts. I'm still in the process of restoring my B7100D. I did the front half of the tractor last winter. I plan on doing the rear half this winter and hopefully...

somehow pic two is upside down pic 4 is a close up of pic 1 sorry I didn't plan on hijacking the thread

I managed to get off work a little early and took some pictures of the B7100 gauges and and sensor locations. The gauges are made by Bosch 1.5 inches in diameter from advance auto parts $29.99. I also purchased a copper tubing kit for the oil pressure gauge and a brass tee so I could keep the...

http://www.knightdaletractor.net/ has a L245 with turf tires and rims on it they are parting out if that will help. not sure how much the shipping would be but they were really reasonable on the sheet metal parts I got for my b7100

sure I will take some this weekend thats still an easy thing to do since I havent put the side panels back on yet

you might be right Chim, im just weighing my options and looking at the way each are made

Thanks Daren, I played with a 6ft agmate that my neighbor has to try a see what would happen. I was surprised at how the well mower cut, he had removed the original discharge chute and chains and made a new one so I was curious as to how it would discharge the clippings.

This is a very interesting thread to me. My B7100 has the thermosyphon system as well and is close to the same horse power of the L185/L1801. I installed a mechanical temp gauge near the top of the radiator just above the flutes. My temp readings slowly climb to 180 degree range with no to...

I stopped by agri supply in Garner today and looked at the Caroni ( Italian mower) and the agmate (china mower). Both are rear discharge and roll on four wheels unlike my old rm59 that only had 2 rear wheels. I like the idea of the deck floating independent of the tractor and following the...

Im almost done rebuilding my B7100D and beginning to turn some attention to the rear mount mower. I currently have a very well worn woods rm59. I think it is time for a replacement and would like to hear what others have used. what are the pros and cons of the mower you use?

The parts have been ordered and should be here by the end of next week.