Search results

I bought a metal adapter piece that you cut a short portion from the center of the upper radiator hose and install it there. I found my adapter on Ebay. This is on a B7100.

Now I am confused. This thread talks about 2 different clutches. The title is about a slip clutch. In the discussion people are talking about an over running clutch. As far as I know they are two totally different devices. A slip clutch more or less does the job of a shear pin in the event the...

That PTO reverser is a "rare jewel". Do some research on what that is worth before you put a price on the complete tractor.

Karl is correct. Do not ever operate a 3 point mount backhoe without the assembly that stops the 3 point hitch from moving!! With a backhoe fastened to the tractor the 3 point hitch is used to hold the backhoe to the tractor not to raise and lower it. Depending on the seat mount and clearance if...

I don't know anything about cleaning or painting the plastic tanks. However I can tell you about how I solved the problem of not being able to tell how much fuel was in my B7100. I purchases a short length of clear plastic fuel line and a couple of brass T fittings. I cut one T into the bottom...

I have a used but still serviceable old style hub that I would sell for $30.00 plus the cost of shipping. In fact I have another that is broken that I will through in for the same price. I really don't know how much to $$ ship but if you are interested I will find out. I replaced these with the...

Leaking down is very "normal" for a piece of equipment with some age on it. My backhoe does the same thing.

I don't know about the brake rod for your tractor sorry. But I do have a tip for B7100 owners. My old house had lots of hills so I was constantly using the brakes. One side got so bad they were grabbing and making a loud noise when I applied them. I ordered new shoes for that side. If I...

Aquaforce-- Was the water outlet drilled for the sending unit? I just installed an electric water temp gauge on my B7100. I purchased an adapter that let me splice into the upper radiator hose to install the sending unit. I guess I will feel a little silly if there was a plug for it that I did...

This sounds exactly like what was happening to my B7100. I looked at my radiator and it looked clear. Someone convinced me to blow it out with an airhose. I could not believe how much junk and fine dust came out and I will stress again it looked OK before I started. Everyone said to blow it out...

Did you blow out the radiator fins with an air compressor? This sounds exactly like my B7100 acts after I have been cutting for a while. The first time mine overheated I looked at the screen and the radiator and did not think it was blocked. Someone convinced me to remove the screen from the...