Search results

C'mon, don't be shy. I know somebody knows and is chopping at the bit to help me but is just a little on the shy side. I'd appreciate any help!

Anybody know if the steering boxes are interchangeable?? Thanks in advance!

^ Keeping it bumped up ^

Nobody knows if they're interchangeable?

This is the pdf link for the 2 different boxes, early and late. file:///C:/Users/us/Downloads/B6000%20Steering%20Box%20Versions.pdf Does anybody know if I replace my early box with a late box, all parts included, if it would bolt on and work properly on my tractor? I don't see why it...

Thank you very much! I'll be headed out to check for the plug now. Do you know if the late box would adapt to my early tractor if I bought everything with it (sector gears etc..)? I appreciate your help!!

^bump it up^

Another question. I'm going to take the steering box apart to see if there's any damage (I suspect there is) and I believe I have the "early" style box :mad:, is there ANY way I can convert over to the "new" style box?? Please tell me yes?

Also, should I use JD Cornhead grease like I do in my 8N steering box? Thanks.

Hello, I recently bought a B6000 and I know I need to grease the steering box but not sure how to do so. Do I remove one of the bolts on the box and grease through there? Any info would be VERY much appreciated!

Ok, I understand a lot better now. I appreciate the response and explanation, NIW. I have been running the throttle at full speed since I read that it's best to run a diesel at fun throttle. Is that true? The reason I started doing that is because I noticed white smoke from the exhaust and...

Hey there, I have a question I'm hoping somebody can explain for me. I read somewhere (I believe this site) that it's best to run the pto on the pto's first gear/setting. That would be the 524 rpm one. Is this correct? It doesn't seem fast enough to me when bush hogging but what I read said...

Will do! I appreciate the response and the advice!

Great, thanks for your reply.

Great, I'll stop by TSC tomorrow. I appreciate your help.

Ok, thanks a lot for the reply! I haven't even looked close enough to see if they're sharpened on the correct side or not, I just assumed they were not. Do you know if the "reverse" spinning blades are special order or not? Didn't kow there was such a thing. Thanks again!

I recently acquired a B6000 and it come with a 3 ft bush hog. I read on here that due to the CCW pto that flipping the blades was what should be done. My question is, could I sharpen the other side of the blade instead of flipping them? I can and will try to flip them but not sure how rusted...

file:///C:/Users/us/Downloads/Kubota%20Tractor%20B6000%20Operators%20Manual.pdf

I'm not sure but I have the same machine so I'm curious as well.