Search results

I own a b2320 and came across 2 snowblowers 60 inch in new condition with a little rust for 1500$ 50 inch meteor with more rust but can be painted for 960$ So I went back and forth for a week and decided to buy the 50 inch since I don't have a huge driveway. Now that. I have purchased it...

so I ended up buying the 50 inch at 960, I know I could have gone with the 60inch but I don't have a huge driveway and the 50 inch is less bulky so it will fit nice in the garage and plus I saved 540$$. If it takes me an extra pass I'm ok with that because I get to play on the tractor longer...

So the guy is asking 1500 for Agro trend 60 inch blower in new condition I also found a 50 meteor for 960$ but needs a good paint job...

Would a 60 inch snowblower be to big for the b2320? The price is right but I'm worried it's a little big? I know the recommended size would be 54

I'm ok if HST makes noise as long as it's normal. I think what I'll do is go see my salesman and ask to drive a tractor on the lot to compared noise. My tractor is still pretty new with only 10 hours put on so noises should be the same

I guess there's still a break in period for me and the tractor. It gets louder when the rpm is higher.... I normally have it at low rpm just to bring wood in the house.... I wouldn't say it's a whining noise per say it's just noise from where the rear wheels and pto is

Hi, I have a 2015 b2320 with 10 hours. I bought it in January of this year and I noticed when I first got it how quiet the HST was especially in colder weather I thought it would have been louder. I just noticed today that the HST is louder then it was and the noise is like if I had it in high...

Hi, I have a 2015 b2320 and its happened a couple times where the tractor shuts off when I get off. Tractor is completely stopped before I get off. When it shuts off I turn the key to off and try to start up again but tractor doesn't even turn lights come on but it doesn't turn over. I do this 3...

They can get away with it because I don't think most customers pay attention to oil levels when you first get them from the shop. You expect it to be ready to go. They gave me the oil to add in the HST and I told them I would drain some engine oil but then I got thinking I shouldn't be doing...

I understand the human part of things but when we pay a pre delivery inspection (800) I expect things to be in order especially oil levels. I've check oils on level ground in my garage. I hope it's not hydraulic oil leaking in engine like you say. I went to dealer to get oil for hydraulic and...

I checked it right after shutting it off, so I said to myself that's maybe why it's reading higher on dipstick so I waited an hour or so then checked it again and it was at the same level. Why would the level increase as time goes on?? What would that mean?

I bought a b2320 a couple weeks ago and used it a couple times. I decided to look at oil levels and noticed engine oil is about 1/4 to almost 1/2 inch above full mark and hydraulic level is at the bottom line so very low, I haven't check the front axel yet but will to make sure it's ok. #1...

It would be pretty hard to get heat from it if I had a cab on it! This could be an issue down the road when I do get one

Ya I'll try to work it harder next time I get it out! I guess these engines run fairly cool!?

Hi, I just bought a b2320 and used it for an hour or so doing light work and the temp gauge hardly moved at all, it was still on the black line near the C. I even opened the hood to see if the hose from radiator was hot and it was just warm. Is this normal?? It was -5c outside so not super cold.