Youbet's latest activity
-
Youbet reacted to nerwin's post in the thread What did you do to or on your Kubota today? with
Like.
I added some gussets to the ballast box to reinforce the pins. They work great! Definitely doesn't bend now and easier to hook up... -
Youbet replied to the thread What did you do to or on your Kubota today?.OSHA… I would never get anything done. I woke up from a 8 ft ladder fall with cracked ribs and bad headache. Bucket for me.
-
Youbet reacted to Hugo Habicht's post in the thread What did you do to or on your Kubota today? with Like.
This could go wrong. Friend of mine, very careful normally, falling branch kicked ladder from under him. Running chain saw in his hands...
-
Youbet reacted to nerwin's post in the thread What did you do to or on your Kubota today? with Like.
Changed the L2501's engine oil, oil filter, fuel filter and air filter. Surprisingly a very simple job and extremely easy to do. I had...
-
Youbet replied to the thread What did you do to or on your Kubota today?.Safer to climb in ( or use ladder to get in ) FEL bucket to cut limbs up high as opposed to just use ladder with chain saw.
-
Youbet reacted to Stewart's post in the thread What did you do to or on your Kubota today? with Like.
Was time to elevate the trees around my meadow. This little set up allows me to keep the branches up about 25’.
-
4 summer bucks at the wildlife pond.
-
Youbet reacted to dirtydeed's post in the thread What did you do to or on your Kubota today? with Like.
got the paddock area cleaned out. I wound up removing the two bottom fence boards to clean out between the posts. The whole area should...
-
Youbet replied to the thread First Time Buyer MX4700.I have used and owned 2WD, 4WD, HST, Geared w shuttle shift. Even though your land is flat, tilling or plowing will work much better...
-
Loader tractors put a substantial load on the front axle. The 2wd front ends are wimpy compared to the 4wd axles. Also these tractors...
-
Personally if I were going to be mowing 30ish acres…not sure what OP really mowing, but if I were going to be on it all day mowing, I’d...
-
Yep! I have zero issues using the FEL on the M6060 whether it's moving dirt, picking up stuff with the grapple or using the pallet...
-
GrumpyFarmer, if you have some fabbing skills you can make a real good rake for grass or driveway gravel. I used the teeth from an old...
-
Very nice, happy for you! Funny you mentioned trimming. Just last evening the DeWalt 20V with the pole hedge trimmer made its rounds...
-
Then I borrowed the quick hitch from my SCUT. I have a new one sitting at the dealer, but they were closed when I drove by this morning...