X-Pup's latest activity
-
X-Pup reacted to AZ_Steve's post in the thread L2501 Turbo: A Journey Defined - The tractor, The comparison, The modification, The results... with
Like.
According to google AI it should restore the 20% lost to elevation and give an additional couple HP on top of that, assuming a 4.5 psi... -
X-Pup reacted to Rdrcr's post in the thread L2501 Turbo: A Journey Defined - The tractor, The comparison, The modification, The results... with Like.
^^^^ Thank you! Robert does great work! We'll get it on the dyno probably around the same time we get the next tractor turbo kit...
-
My top and tilt kit came from FiteRite hydraulics this afternoon. Both cylinders and the hoses were very well packaged. I'll get it put...
-
X-Pup replied to the thread L2501 Turbo: A Journey Defined - The tractor, The comparison, The modification, The results....That's some sexy looking pipework! :love: I'm curious what the dyno's say. Lookin good! (y)(y)
-
X-Pup reacted to Rdrcr's post in the thread L2501 Turbo: A Journey Defined - The tractor, The comparison, The modification, The results... with Like.
Innovation is inevitable. And we’re making BIG changes to the S2T Performance L2501 and L3240 Turbo Kits and our future Tractor Turbo...
-
X-Pup reacted to Rdrcr's post in the thread L2501 Turbo: A Journey Defined - The tractor, The comparison, The modification, The results... with Like.
The Turbo Drain Pipe Upgrade Kit has been added to the drop-down on the website at the bottom of the page...
-
A picture is worth a thousand words………….. I don’t own one, but I am “VERY NICE” to my neighbors 5 cats and often give them a “snack" ;)
-
X-Pup reacted to BX25D Rookie's post in the thread L2501 Turbo: A Journey Defined - The tractor, The comparison, The modification, The results... with Like.
Agreed, that is a clean & convenient setup for the turbo drain. Nice job!
-
X-Pup reacted to Rdrcr's post in the thread L2501 Turbo: A Journey Defined - The tractor, The comparison, The modification, The results... with Like.
On both the L2501 and L3240 the factory dipstick tube located on the right side of the engine (when an operator is seated) remains in...
-
X-Pup reacted to Rdrcr's post in the thread L2501 Turbo: A Journey Defined - The tractor, The comparison, The modification, The results... with Like.
The length was determined by the hard lines; We shortened the tube as much as we could while still allowing it to clear the hard lines...
-
X-Pup replied to the thread L2501 Turbo: A Journey Defined - The tractor, The comparison, The modification, The results....How did you determine the length of the drain tube before welding on the fitting? Going by the picture it looks like it sticks out a...
-
X-Pup reacted to Rdrcr's post in the thread L2501 Turbo: A Journey Defined - The tractor, The comparison, The modification, The results... with Love.
As I've been mentioning over the past couple months we are making a couple significant upgrades to our current and future Turbo Kits...
-
X-Pup reacted to Lowlysubaruguy's post in the thread Hydraulic powered pump for concrete mixer with Like.
Finally finished this project. Not sure if I went about it the easy way or hard way. No major fabrication going this route. Which was...
-
I will add if it were me I would order the grapple with 3/8" flat face fittings and if those didn't match my third function I would...
-
X-Pup reacted to alba acres's post in the thread L2501 Turbo: A Journey Defined - The tractor, The comparison, The modification, The results... with Like.
cant wait to order a 2502 kit thank you for your hard work