Recent content by wpaulrjr

Thanks to all again - The help with the L295DT was OUTSTANDING Your thoughts and wishes for Susan are GREATLY appreciated We do expect her to fully recover. I plan to hang around on this site - everyone is nice, knowledgeable and I am sure my Kubota would not be working without all of the...

Guys....... Your G R E A T ! The problem has been resolved. Before I disclose the root cause, everyone MUST promise not to laugh.... at least not out loud........ As 100TD had pointed out, I needed to check the fluid level at the plug nut, in the loader arm / frame in one of the previous...

hey guys - sorry to disappear for a while Thursday my wife had a stroke (not as severe as it could have been, we were really lucky) and I've been basically living at the hospital I will be bringing her home tomorrow and once I get her settled, I'll be back out at the barn checking out all of the...

100 TD, Thanks for identifying a few of the parts for me. I will put a wrench on all of the fittings after work tomorrow and let you know if I find any loose ones. I replaced almost all of the hydraulic hoses about a month ago. Are there adjustments for the cylinders that you mentioned...

Wolfman, I took 2 pressure tests (thanks for asking where I took them, If there is a wrong place to take the test, Thats where I would have taken it) See the attached pic- the first time I tried, I removed the hose from the control valve, put a plug in the hose and put the pressure gauge in...

100TD, I did not check it there. Tomorrow I will back that plug out. I'm guessing that hydraulic oil should start flowing down from the hole once the plug is removed? Will let you know how that goes. Thanks so much for the tip

Shootem604, I dont remember seeing any plates, tags or labels (honestly I did not go looking for them today but I will tomorrow) While I'm trying to be honest...... you need to know that sometimes I cant find the remote when it's on the coffee table

MBU thanks for the links to the books I was able to download them and I am sure they will come in handy GREATLY appreciated

Here is the rest of the pic's

Guys, GREAT advise - very much appreciated I took several pic's as I dont know exactly what to photograph. Please take a look and your thoughts would be GREATLY appreciated

Wolfman - thanks for the time I am running late at work today and the weather is lousy here I will get you the pics as fast as possible Hopefully with the pic's, you can point me to where the possibly clogged screen is so I can check it.

Here are some photo's of the pump You guessed right, I'm not a photographer either

the engine oil level is not increasing

I believe the pump in the front only supplies the loader. The three point hitch is working fine. It is showing no problem lifting a brush hog.

Yes - there is a separate pump on the front of the tractor engine