torch's latest activity
-
torch replied to the thread 2002 Ford E350 hood stuck closed - HELP!.I'm offering to whichever of your personalities is trying to open the hood by tugging on the parking brake release. :D -
torch replied to the thread B7800 front axle ball bearing question.I think that might be a typo? I believe the 6205 is 17mm wide, not 19mm. A minor point, since width has no bearing on the slip fit...
-
torch replied to the thread 2002 Ford E350 hood stuck closed - HELP!.A lot of nursing homes will have an Alzheimer's ward or floor for patients with dementia. To protect those patients who might wander off...
-
torch replied to the thread 2002 Ford E350 hood stuck closed - HELP!.Depending on where the cable is broken, one can often simply pop the hood by grabbing the cable itself and pulling. The outer jacket...
-
torch replied to the thread B7100HST - D ... First time owner assistance.Ok, first off, how many bolts holding the front wheels on? Four bolts indicates it is an older version, 6 bolts are the newer flavour...
-
torch replied to the thread Hydraulic block outlet B3350.Not your question, but are you aware of the potential issues associated with 3ph backhoes? There is a risk of damaging castings on the...
-
torch replied to the thread 110v AC motor/appliance start up monitor.You need a cycle counter? Or would an hour meter be more appropriate?
-
torch replied to the thread New Headlights & Brackets for the B7100!.Nice. Will you be posting the STL on any of the community sites?
-
torch replied to the thread Hanix Mini Giant excavator?.Google translation: Good morning I also own a hanix n150-2 and I would need the spare parts manual, the other one in Norwegian I have...
-
torch replied to the thread Best attachment for removing pine needles?.I bought the Titan a few years ago for the same intended purpose. Works OK on leaves*, so-so on pine needles. Yes, if the mat of...
-
torch replied to the thread A little Machinist advice please."Twice 'round the park" as it were. I suspect the OEM pulley lasted at least that long too. <lol> I'll be a little more confident if...
-
torch replied to the thread A question for the ages..........What do "those people" do, when they can't find their 11/16 drill bit, but don't have a lathe?????.Do you have a 4-jaw chuck? Perfect application for one as the jaws are independently adjustable so you can grip irregularly shaped...
-
-
torch replied to the thread where to buy cylinder repair kits.Yes, thanks for the clarification. I was speaking of the "seals" as a pair and their combined functions. The inner one regulates the...
-
torch replied to the thread where to buy cylinder repair kits.I'm not sure if I'd worry about it if it is truly losing only 2 drips after a "couple of days" under the pressure of supporting the...
-
torch replied to the thread B1750 dt. Hydraulic Control Block Pressure Relief.Thanks for the clarification.
