Recent content by Ridelght

Wanted to update, it was my inlet. I removed the seperator off the tractor tipped it to that side a tiny bit came out. Turned to outlet ran out fine. No screen or filter but partialy clogged. I used a weed eater string gently pulled out the gunk. Then ran a good stream of fuel out it to be sure...

No, i did with the cap off though. Not just loose.

Thanks, im in Ohio, tomorrow im starting square 1. Im sure its something simple. 95 hours on this tractor and ive done all the maint records. Very puzzling and my 1st diesel. Thank you, ill look at the banjo bolts and just replace the seperator filter. I cleaned it before in kerosene. Thats what...

Thanks. Mine has bolt on fittings at the seperator. I did not check that though.

With saddle tanks under, how does fuel run up to the seperator unless the pump siphons it? The check valve i found on Messicks says it maintains pressure. If it sticks open fuel can run back to the tank. Im going to try replacing it next. Then guess sending to the dealer.

Yes, and replaced the pump with a oem Kubota. The pump has power and clicks. I had the seperator apart and cleaned everything as my manual said to do. I then blew air through that inlet line in to the tank. Saw a mist out of the tank. I had transferred pumped all the fuel out. I then blew air...

I just bled it again with the screw all the way removed. Got no fuel at all that i saw. But it started for few minutes then quit. Could the check valve that helps the inline pump cause this?

No

Hi, My 2022 L4060 is giving me issues. It happened las Saturday, it was running like normal then started bogging like the fuel tanks empty. The gauge showed 1/4 so in my tractor that's 4-5 gallons. I pulled it back to the barn at first I thought the gauge was off so I filled it up. Did nothing...

A hunter goes into the woods to hunt a bear. He carries his trusty 22-gauge rifle with him. After a while, he spots a very large bear, takes aim, and fires. When the smoke clears, the bear is gone. A moment later, the bear taps the hunter on the shoulder and says, “No one shoots at me and gets...

Here is 1 i found. Anyone ever hear of them ...

Well, you are correct. No one has these in stock. 2 to 3 months out on the L8396. Valves and stacking kits/ handles all in stock. I may look in to a ditch mower that has its own hydraulics. Run off the pto. Not sure though on reliability.

Thanks for all the Help

sorry i misunderstood the pricing. i found the kit at German Bliss. Cant find the valve though.