Recent content by RedRiot15

I bought the plow second hand (only 2 months old/like new). It is real easy to connect especially if you don’t have the app em 3rd function button on joystick. Wiring harness It connects direct to the battery and then to key signal for relay under dash/By battery. Then run harnes up to lever...

The controller for the 2826 the top button when pressed does the left blade and the bottom button does the right blade (loader stick to left to angle left or right to angle right) There is also a button on the back when you press it it allows you to either scoop or V the blade back in one...

Yeah it works really well !!! I bought the bx2826 kubota v plow and it is controlled left or right blade with a button (won’t move if you don’t push one of them) and then has a back button where if you push it it scoops(handle to left)or angles back (handle to right)

My front tires are loaded on my BX. I got a 72” Front v plow on the k connect running turf tires

Yes you can Each side is operated separately. On my blade the left side is controlled all the time and right side I use third function button to move right side. So I can angle one side or the other ahead or back while leaving the other straight

If you’re not a couple inches of snow I prefer to use a blade if we get more than I use the blower. With both setups I use a box blade on rear for back dragging from the doors etc. I also run loaded front and rear turf tires with no issues

I wear electric gloves I have psoriatic arthritis. Almost need a heated loader control too then. I find my right toe gets cold now

Since making this blade I found the 2826 blade for a crazy deal so ended up picking it up aswell. It’s 60” wide straight 50” V back

I have the front mount 48” commercial blower and wanted a blade to connect to k connect for when it only snows an inch or few. I originally seen the bx2826 plow and wanted to get one but when I seen the price I decided to build myself one with a skidsteer 72” v plow (60” V) I bought the k...

I just bought the 2826 v plow this past weekend off a buddy It uses same k connect as the rest of the k connect attachments for the 80 series. The only down side I see is the third function activation you have to press a button for left or right on front of joystick for left or right blade and...