Recent content by Pignout

  1. P

    M8200 transmission

    Finally get a day that's over 50 and not raining and start mowing. Within 20 minutes I notice a fare amount of hydraulic fluid coming out of the gear shifter. Is there a trany vent that's maybe plugged. If so can someone tell me where it is and how to get to it. Thanks
  2. P

    M8200 pto issue

    Because PTO stops
  3. P

    M8200 pto issue

    Because the PTO stops
  4. P

    M8200 pto issue

    Fluid was changed by dealer while in for recall work. 1000hrs
  5. P

    M8200 pto issue

    The drive line stops
  6. P

    M8200 pto issue

    All new filters and fluid change less then 20hrs ago. PTO stops..... It has nothing to do with the clutch on the drive line to the mower. All other hydrolics work fine as does the transmission clutch. When PTO stops turning there is no squeals, growns, bangs, or shattering. It just stops till...
  7. P

    M8200 pto issue

    My wife was doing some brush hog work yesterday and when she was done for the day she said that in the areas where the grass was thicker the mower would stop. First thing I told her was to only cut half a row in those areas but I tightened the clutch on the mower a bit also. Today I was doing...
  8. P

    M8200 hydrolics/trany

    I heard a whine coming from transmission today so investigated. Checked dipstick above pto in rear and was full. Wanted to see fluid so crawled under tractor and took out drain plug located about 12" toward back of tractor from the 2 oil drain plugs just in front of pan. Nothing came out. Used...