Recent content by olhntr

I'm looking for sub frame to mount an old ARPS 105 backhoe on my Kubota L3010 4X4. I realize fabricating will have to be done, but need something to start with. Plan on using a PTO pump and separate reservoir. Any help would be appreciated. Change in plans, with no sub frame for the Kubota...

If it won't shut off with the key the fuel shut off solenoid is probably bad.

General advise has been that if you rebuild an engine with a flat tappet lifters and put in a new cam and lifters, you should use a break in oil designed for this purpose. It will contain more so called impurities like zinc which aid in lubrication and insure you don't flatten the camshaft...

Yup, jumped the selenoid and it started. Now I'm sure it's the clutch safety switch, I'll order one today. Thanks. Bob

First big snow and it won't start. Ran fine a week ago, battery is OK, glow plugs work, but the starter won't engage. I've on occasion had to depress the clutch petal a couple of time to get the starter to work. I'm thinking it's the clutch safety switch. Where is it at, and how do I check...

This is for a front mounted snowblower. A 3 point you could run off an fel valve or you need aux. hydraulics on the tractor. For the front mounted I don't know if you are using the fel valve or an add on, but it makes little difference. Just did an L3010 with an L481 loader so I used a new...

I need any or all of the brackets to mount an L2054B quick hitch subframe to an L series Kabota. I have an extra subframe and need brackets to make it salable. Let me know what you have. Thanks. Bob Still looking!

Before I try, does anyone know for sure how you remove the fan from an L2052-1 Kubota snowblower. Appears the fan is keyed on the shaft, but I'm not sure what type of puller you would have to use. Thanks. Decided to go ahead and try. I guess to be correct I should have said Impeller rather...

I'm looking for a complete Quick hitch subframe for a 2000 L3010 to mount a front snowblower. I have the blower, just need the subframe. Thanks for the space and time. Found what I needed. Thanks again.